Transport of Uc/os- Ⅱ on S3C44B0X Microprocessor

QI Ji-zhong,WANG Zi-qiang

DOI: https://doi.org/10.3969/j.issn.1002-2279.2005.04.021

2005-01-01

Microprocessors

Abstract:Based on ARM7TDMI microprocessor system construction that have the extensive and applied foreground, This essay introduces and analyses the course that transport embedded real-time operating system uC/OS-Ⅱon S3C44B0X microprocessor.

What problem does this paper attempt to address?

The Control System Based on ARM and Μc/os-Ii for Die-casting Machine

乌宇杰,陈章位

DOI: https://doi.org/10.3969/j.issn.1001-3881.2009.01.040

2009-01-01

Abstract:The die-casting machine control system based on EP9315 and μC/OS-Ⅱ,a kind of realtime embedded operating system,was introduced.The hardware and software structures of the control system were presented.The controlling of the die-casting machine was acrieved.
Application of MicroC/OS in the control system of intelligent robocup

Hui Dong,Jiangang Lu

DOI: https://doi.org/10.1109/WCICA.2004.1343615

2004-01-01

Abstract:With the development of soccer robots, application of embedded real-time operating system (RTOS) in the control system of robots is attracting more and more considerable attention for meeting the increased requirements of complexity and real time. A control system of intelligent robocup was developed, which was based on the embedded RTOS of MicroC/OS-II and the digital signal processing (DSP) chip of TMS320F2407. It adopted the control algorithm of PPLID available in the literature. This control system is superior in computation, control and real-time performance.
Design of an Intelligent Car System Based on Μc/os-Ii

Wenjun Yan

2006-01-01

Abstract:The application of RTOS μC/OS-II in a system of a mobile car based on the Samsung ARM7 micro processor S3C44B0X was mainly presents.By the scheduling method of multi-task RTOS,we solve the problem of poor real-time performance in single task design method,as well as improve the system's reliability.The transplant of μC/OS-II briefly was addressed first,and the whole design of system software and running regulation of individual task was elaborated.
Software Design of an Intelligent Car System Based on Μc/os-Ii

Yang,Yan Wenjun

DOI: https://doi.org/10.1109/chicc.2006.280780

2006-01-01

Abstract:This paper mainly presents the application of RTOS μC/OS-II in a system of a mobile car based on the Samsung ARM7 micro processor S3C44B0X. By the scheduling method of multi-task RTOS, we solve the problem of poor real-time performance in single task design method, as well as improve the system's reliability. In this paper, we first explain the transplant of μC/OS-II briefly, and then we elaborate the whole design of system software and running regulation of individual task.
The Application for S3C4510B in Remote Digital Video Monitor System

ZHUANG Ke,LIN Bin,CHENG Liang

DOI: https://doi.org/10.3969/j.issn.1005-5630.2005.05.009

2005-01-01

Abstract:This paper introduces the application of ARM-architecture-based 32-bit MCU S3C4510B in a remote digital video monitor system.In this paper,a S3C4510B-based control module and an OV6630-based image collection module combine with MPEG encoder and CPLD to form an integrated system.And this paper puts the emphasis on the hardware and software implementation procedure of the S3C4510B-based control module and successfully make the application for the 32-bit MCU in the area of remote digital video monitor.
Software and hardware design of network static image transfer in the monitored control system based on ARM

PAN Tai-cai,LIN Bin,QI Xun-jun,LIN Xiao-qian

DOI: https://doi.org/10.3969/j.issn.1005-5630.2006.01.013

2006-01-01

Abstract:This paper worked out one method to apply the 32 bit micro-controller(S3C4510B) based on ARM7TDMI system structure to automatic monitored control system.In the uClinux operation system,it designed the hardware and software which functioned successfully in the network image transferring through the S3C4510B control module.In addition,it described how to write Bootloader and transplant the core of uClinux operation system in S3C4510B chip.It is possible to the commercial applications of automatic monitored control system for this system's high speed and stability.
The Design of MDF Remote Intelligent Supervisor System with S3C44B0X

LIN Ying-zi,XU Yuan-xin,WANG Kuang

DOI: https://doi.org/10.3969/j.issn.1671-7147.2005.03.007

2005-01-01

Abstract:MDF remote intelligent supervisor system reduces administrators redundance and facilitates concentrating management of the distributed switching offices,which monitors malfunction of the remote office and transfers the messages to the center office. This system adopted ARM7TDMI-S3C44B0X as main processor produced by SAMSUNG Corp. The communication method between center machine and the remote one is based on Ethernet. The paper elaborates the system scheme and the realization of network communication.
The Design of Mobile Robot Based on S3C44B0X

HUANG Wei-wei,HU Ying-jian,YAN Wen-jun

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.12.008

2006-01-01

Abstract:The mechanics,hardware design and control algorithm of a tracked mobile robot were introduced and fulfilled.Meanwhile,the transplantation of embedded system μC/OS-Ⅱ on the 32-bit ARM7 chip,offered by Samsung Co.,Ltd.,and the design of the software were also illuminated.
Constructing of Software Platform Based on Μc/os-ⅱ

华亮,杨世锡

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.15.071

2004-01-01

Abstract:This paper introduces a software platform based on μC/OS-Ⅱ. Realization of system modules such as kernel extension, TCP/IP protocol stack, file system is discussed. This platform provides utilities for application based on μ C/OS-Ⅱ and makes the work easier and faster.
Design of a Media-Enhanced and Reconfigurable RISC ,Microprocessor

CHEN Dong-xiao,ZHOU Jian,ZHANG Hua,MEI You-liang

DOI: https://doi.org/10.3969/j.issn.1000-7180.2006.10.064

2006-01-01

Abstract:To meet embedded multimedia applications, a media-enhanced and reconfigurable RISC microprocessor is designed. Media-enhanced extension, pipeline controlling strategy, bypassing unit and exception handling are studied. By parameterized and module design, the microprocessor can be configured easily. The RISC core is simulated in Xilinx X2CV3000 FPGA successfully and an MPEG-4 AAC decoder based on the microprocessor has been implemented. The result shows that the core can be conveniently integrated into SoC.
Porting for Using MicroC/OS-II with 80C196

Xudong Z

DOI: https://doi.org/10.3969/j.issn.1008-0570.2006.02.022

2006-01-01

Abstract:A embedded system using RTOS(Real Time Operating System) has higher reliability, higher stability and high speed. The RTOS MicroC/OS-II is a complete, portable, ROMable, scalable, multitasking, real time kernel, and open source, so it has been widely used in the embedded system. Combining a real application, the porting and notice for using MicroC/OS-II with 80C196 are introduced the in this paper.
Design of micro wireless network measurement and control server based on ARM and μuC/OS-II

Bo Jing,Jie Zhang,Zheng Qin,Zonglin Zhang,Yong Sun

DOI: https://doi.org/10.1109/WCICA.2006.1713220

2006-01-01

Abstract:A novel developer application and platform framework for embedded Web Measurement and Control Server was proposed, the hardware bases on ARM7 microprocessor, which used CS8900 as the net interface chip and nRF905 as Wireless communication chip, the software based on embedding real-time operating system μC/OS-II and TCP/IP protocol were designed and implemented in details. Described the main process of porting the open-source embedded operating system μC/OS-II to ARM processor, and achieved an embedded web server based Internet multi-task system platform. Ultimately, some example using the embedded Web server is simply described. ©2006 IEEE.
Design of Network File Management System Based on Nios II

葛春雨,王秋生,梅顺良

DOI: https://doi.org/10.3969/j.issn.1002-8692.2008.10.035

2008-01-01

Abstract:Based on Nios Ⅱ processor designed by Altera Corporation,System on Programmable Chip(SoPC) is built by SoPC builder.The SDRAM controller, Ethernet chip controller, SD Card controller, UART and jtag_uart or other user components are integrated in this system.Then, the software about communications and file system functions are realized based on μC/OS Ⅱ operate system.
Embedded Micro-Controller Unit System for Mixed-Signal Processor

孟彬,蒋俊,易婷,洪志良

DOI: https://doi.org/10.3969/j.issn.1000-3428.2010.06.078

2010-01-01

Abstract:An embedded Micro-Controller Unit(MCU) system for mixed-signal processor is introduced in this paper. According to the request of systems reconfiguration, all the instructions stored in the EEPROM off-chip are transferred into the SRAM on-chip and executed. The MCU system is fabricated in SMIC 0.18 μm mixed-signal CMOS process with an area of 1.06 mm2. It operates from 1.8 V power supply. Measurement results show that all of the instructions are executed correctly and it can be used to configure the function of the mixed-signal processor in a way compatible with SPI protocol.
Development of the Control System of Automatic Flat Knitting Machine Based on Μc/os-ⅱ Embedded Technology

Jian-fei L(U),Jian-zhong FU,Dan LIU

DOI: https://doi.org/10.3321/j.issn:0253-9721.2006.01.009

2006-01-01

Abstract:A new control system of the fully automatic flat knitting machine developed based onμC/OS-Ⅱ embedded technology was introduced,and the functional requirements of the flat knitting machine and execution of its control system were analyzed.This system used a 32-bit ARM microprocessor and an expander as the hardware carriers and theμC/OS-Ⅱas the real time operation system.It adopted the design of multi-tasks,and realized the task scheduler by its priority and communications between tasks with theμC/OS-Ⅱoperation system.
Porting μC/OS-III on S12X Processor

Zeng Zhaoming,Gong Hui

2013-01-01

Abstract:This paper presents the improvement and development of μC/OS-III compared with μC/OS-II,and shows the basic principle and method of μC/OS-III porting.The gradual steps of porting μC/OS-III on S12X are given at last,following which readers can successfully accomplish the porting work.
OS-Level IPC Implementation in Complementary Multi-processor Systems

Ke Pei,Gang Zhang,Chang Qing

DOI: https://doi.org/10.1109/APWCS.2010.26

2010-01-01

Abstract:Most of embedded multiprocessor platforms are ideal for running diverse operating systems and implementing different applications. Inter-processor communication interface makes it possible for an embedded multi-processor system to easily support multiple subsystems parallel processing. This paper propose a kind of OS-level communication interface implementing method based-on HPI in the Complementary Multi-processor System and present the primary principles and corresponding DSP side code structure for HPI. Take a single-board embedded multimedia system which was integrated three embedded microprocessors (PXA255, TMS320DM642 and SM501) as hardware platform, detailed description of how implement tasks communication and data transform by HPI between different embedded OS(ARM-Linux and μC/OS-II) running on ARM and DSP separately.
Uclinux Transplantion Based on ARM7TDMI

陈坚华,范燕,冉立新,陈抗生

DOI: https://doi.org/10.3969/j.issn.1005-9490.2003.01.004

2003-01-01

Abstract:This paper introduces uClinux embedded operation system and ARM7TDMI core,and also analyzes the problems in transplanting uClinux based on ARM7TDMI?
File System Design for Memory in CompactFlash Card on Microprocessor Based on ARM7TDMI

QI Ji-zhong,WANG Zi-qiang

DOI: https://doi.org/10.3969/j.issn.1002-2279.2007.01.037

2007-01-01

Microprocessors

Abstract:Based on ARM7TDMI embedded processor architecture that have the widely application foreground,This essay introduces and analyses File System Design For Memory In CompactFlash Card.
Application of Μc/os II in RealTime Monitoring System

Wei Lu,Fu Min Bao

2006-01-01

Abstract:Introducing realtime operating system into embedded system will improve the reliability and efficiency of the embedded application.This article focuses on the problems in the process of applying μC/OS Ⅱ, a fully preemptive,multitasking,portable and scalable realtime kernel,to Monitoring System.The detailed realization is proposed combined with Micrcehip PIC18F452 MEU.The result of application in project indicates the system has an outstanding effect in practical application.

Transport of Uc/os- Ⅱ on S3C44B0X Microprocessor

The Control System Based on ARM and Μc/os-Ii for Die-casting Machine

Application of MicroC/OS in the control system of intelligent robocup

Design of an Intelligent Car System Based on Μc/os-Ii

Software Design of an Intelligent Car System Based on Μc/os-Ii

The Application for S3C4510B in Remote Digital Video Monitor System

Software and hardware design of network static image transfer in the monitored control system based on ARM

The Design of MDF Remote Intelligent Supervisor System with S3C44B0X

The Design of Mobile Robot Based on S3C44B0X

Constructing of Software Platform Based on Μc/os-ⅱ

Design of a Media-Enhanced and Reconfigurable RISC ,Microprocessor

Porting for Using MicroC/OS-II with 80C196

Design of micro wireless network measurement and control server based on ARM and μuC/OS-II

Design of Network File Management System Based on Nios II

Embedded Micro-Controller Unit System for Mixed-Signal Processor

Development of the Control System of Automatic Flat Knitting Machine Based on Μc/os-ⅱ Embedded Technology

Porting μC/OS-III on S12X Processor

OS-Level IPC Implementation in Complementary Multi-processor Systems

Uclinux Transplantion Based on ARM7TDMI

File System Design for Memory in CompactFlash Card on Microprocessor Based on ARM7TDMI

Application of Μc/os II in RealTime Monitoring System