Uclinux Transplantion Based on ARM7TDMI

陈坚华,范燕,冉立新,陈抗生

DOI: https://doi.org/10.3969/j.issn.1005-9490.2003.01.004

2003-01-01

Abstract:This paper introduces uClinux embedded operation system and ARM7TDMI core,and also analyzes the problems in transplanting uClinux based on ARM7TDMI?

What problem does this paper attempt to address?

Software and hardware design of network static image transfer in the monitored control system based on ARM

PAN Tai-cai,LIN Bin,QI Xun-jun,LIN Xiao-qian

DOI: https://doi.org/10.3969/j.issn.1005-5630.2006.01.013

2006-01-01

Abstract:This paper worked out one method to apply the 32 bit micro-controller(S3C4510B) based on ARM7TDMI system structure to automatic monitored control system.In the uClinux operation system,it designed the hardware and software which functioned successfully in the network image transferring through the S3C4510B control module.In addition,it described how to write Bootloader and transplant the core of uClinux operation system in S3C4510B chip.It is possible to the commercial applications of automatic monitored control system for this system's high speed and stability.
Research on the Development of Embedded NC System Based on ARM Platform

LI Yi-Ping,HE Yong

2008-01-01

Abstract:To solve the NC (numerical control) defects of instability, high cost and large volume based on PC system,the NC hardware platform was established based on the PMAC motion control card and ARM system. The structure of main control software was designed based on ARM-Linux operation system. The module partition scheme of embedded NC system hardware was researched. The solution of NC code complier and the driver of PMAC in Linux were given. The practice shows that the NC machining require can be meet with real time embedded NC system.
Porting ARM Linux to EP7312

李程远,刘文峰,李善平

DOI: https://doi.org/10.3969/j.issn.1000-7024.2003.07.022

2003-01-01

Abstract:Linux supports various architecture and is an operation system which is easy to be ported. The technique of porting ARM Linux to one board based on Cirrus Logic EP7312 SoC processor is introduced in this paper. All the work consists of the design and implementation of bootloader, the porting of ARM Linux kernel, and some relative research about the development of embedded applications.
Transplanting uC/OS-Ⅱ kernel to FPGA-based CPU MiniArm

李山山,李耀锵,刘敬晗,汤志忠

DOI: https://doi.org/10.3969/j.issn.1002-4956.2010.04.026

2010-01-01

Abstract:This article introduces FPGA-based CPU called MiniArm,mainly on its instruction set,structure and detailed implementation;discusses the key technology of transplanting uC/OS-Ⅱ kernel to MiniArm,and the detailed process of the implement is introduced;analyzes the test method and the result of the transplanting;and finally summarizes the general methods of transplanting operating system to FPGA-based CPU.
Transplantation and Application of Embedded OS Μc/os-Ii in ARM

赵宁,陈明,何鹏举

DOI: https://doi.org/10.3969/j.issn.1674-5795.2004.04.011

2004-01-01

Abstract:The main process of transplanting the open-source embedded operating system μC/OS-II to ARM processor is described. An example of embedded internet multi-tasks run system is given. It shows many advantages such as low cost, portability and expansibility, and it can be widely used.
ARM DEBUGGER BASED ON JTAG

Lu Han,Pan Xuezeng,Ping Lingdi

DOI: https://doi.org/10.3969/j.issn.1000-386X.2007.02.048

2007-01-01

Abstract:With the popularity of the uClinux system,it became very important to port and debug the uClinux system on Linux.In this paper,we will introduce a cheap resolvent based on JTAG and GDB,which can give better support for porting and debugging the uClinux system.
Design of an Embedded Real-Time Operating System

Jian-xin WANG,Xue-zeng PAN

DOI: https://doi.org/10.3969/j.issn.1671-7147.2005.04.011

2005-01-01

Abstract:To develop an embedded real-time operating system with own property rights, we combined memory management characteristic of uCLinux with real-time characteristic of RTAI. With elaborate design in main modules such as architecture, memory management, process management, exception and interrupt handling and timer, we eventually made a hard real-time embedded operating system——ZDRTOS.
Research on Embedded Linux Operating System

刘文峰,李程远,李善平

DOI: https://doi.org/10.3785/j.issn.1008-973x.2004.04.013

2004-01-01

Abstract:Taking advantages of the modular nature of Linux, a set of Linux modules were improved to make Linux run on various SoC. The module improvement was including: developing a target-specific bootloader, designing a memory management module for the MMU-less processor, real-time improvement in scheduling module and organizing a small footprint file system for the flash memory. These modules can be reassembled on demands, catering for different boards and applications. Moreover, methods for developing embedded Linux are concluded, including tool chains and debug techniques. Case studies on two hardware platforms, based on ARM720T and M68K respectively, shown that the work satisfies application requirements.
Turbine Condition Monitoring and Diagnosis System Based on ARM and Linux

CHENG Jian,YANG Shi-xi

DOI: https://doi.org/10.3969/j.issn.1001-4551.2010.12.019

2010-01-01

Abstract:Aiming at improving the stability,reliability,safety and life issues of current turbine,a turbine condition monitoring and diagnosis system based on ARM microprocessor and Linux system was designed and implemented.Industrial control board of ARM and data acquisition board based on PC/104 bus were used to form a portable condition monitoring systems with compact size and high stability.TCP/IP protocol added by three monitor functions which are server-side self-monitoring,interactive process monitoring and confirming transmission completed was used to enhance self-monitoring.In any location with Internet,live data of the running turbo with the B/S network mode can be gotten.The significant results indicate that the system runs with high stability,reliability and more powerful function.
The Design of MDF Remote Intelligent Supervisor System with S3C44B0X

LIN Ying-zi,XU Yuan-xin,WANG Kuang

DOI: https://doi.org/10.3969/j.issn.1671-7147.2005.03.007

2005-01-01

Abstract:MDF remote intelligent supervisor system reduces administrators redundance and facilitates concentrating management of the distributed switching offices,which monitors malfunction of the remote office and transfers the messages to the center office. This system adopted ARM7TDMI-S3C44B0X as main processor produced by SAMSUNG Corp. The communication method between center machine and the remote one is based on Ethernet. The paper elaborates the system scheme and the realization of network communication.
Transplantation and debugging analysis of embedded Linux kernel based on S3C2440

Yimin Cheng,Xujie Hou,Hailong Shi,Feng Liu

DOI: https://doi.org/10.1145/3501409.3501470

2021-10-22

Abstract:Linux has the advantages of small kernel, high efficiency and open source code. It is widely used in embedded system development. The method and process of porting Linux to the board based on S3C2440 processor are described. And the kernel transplantation debugging experience is listed. Simply expounds how to build up compiling environment, and the success of the kernel transplantation to the target development board. The embedded Linux porting is helpful to exploit other embeded opirating system.
Embedded Linux Transplantation

CHEN Yong-qiang,TAO Pin,WANG Du-qiang

DOI: https://doi.org/10.3969/j.issn.1006-7167.2012.09.018

2012-01-01

Abstract:This paper introduced the embedded Linux experiment.By using the actual embedded industrial products,the students can experience the design ideas and methods in embedded system;can learn the generation of the embedded Linux operating system,the method of loading and the use of common Linux command;can experience crossover development environment and crossover development method;can familiarize with laboratory network development environment;can understand embedded startup procedure,serial ports,TFTP,and the use of embedded Linux documentation system development tool;and can understand the details of internal implementation of the embedded system,which will lay a firm foundation for the conduct of more important experiments in the future.
A research on realizing CT's forepart data-collecting system using interrupt technique based on an embedded system

WU Mei-lin,ZHENG Jian,WANG Li-qiang

DOI: https://doi.org/10.3969/j.issn.0258-0934.2007.01.043

2007-01-01

Abstract:This paper introduces that the data collecting and transmitting system of CT based on interrupts under the OS uCLinux can bring great stability, and how to design the interrupt driver given the hardware platform of ARM 7 s3c 4510b and CT's data generating process.
The Design of Mobile Robot Based on S3C44B0X

HUANG Wei-wei,HU Ying-jian,YAN Wen-jun

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.12.008

2006-01-01

Abstract:The mechanics,hardware design and control algorithm of a tracked mobile robot were introduced and fulfilled.Meanwhile,the transplantation of embedded system μC/OS-Ⅱ on the 32-bit ARM7 chip,offered by Samsung Co.,Ltd.,and the design of the software were also illuminated.
Remote Data Terminal Based on Embedded System of ARM and uCLinux

周卫玉,孙新亚

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.23.060

2004-01-01

Abstract:This paper introduces a currently prevalent and mature technique of uCLinux embedded system on the arm platform and combines it with the object oriented programming thinking, schemes out a more compatible and easier upgraded remote data collecting and transmitting terminal unit which achieves an excellent performance in practical electric power system applications.
LED Changing Message Sign System Based on ARM Uclinux

ZHANG Lei,YIN Ting-rui

DOI: https://doi.org/10.3969/j.issn.1006-6268.2008.01.017

2008-01-01

Abstract:This paper begins with the importance of LED CMS system in the ITS, then analyzes the functional characteristics of the LED CMS system, introduces the entire design project of the CMS system and the difficulties ,the key technology in the process of design, At last ,we designed LED CMS system embedded controller based on uclinux Operating System.with SAMSUNG S3C44B0X processor and Altera cyclone's FPGA .
Intelligent Control System for Greenhouse Based on ARM+MCU

REN Bo,GUO Jia,ZHANG Kan-yu

DOI: https://doi.org/10.3969/j.issn.1001-9944.2010.10.009

2010-01-01

Abstract:This paper presents the architecture of ARM+MCU in hardware.Linux operating system and libraries of Qt were transplanted to ARM processor to develop human-machine interface,and on this basis,Web server and embedded database were transplanted to implement the remote monitoring of the on-site data.Microcontroller was applied to realize the control of the greenhouse.Cascade control algorithm was used to achieve precise control,and to eliminate the coupling effect,feed-forward was used on this system.At the same time,Smith predictor was added to the main regulator to overcome the effect of large delay and large lag.Filed results indicate that the novel intelligent control system for the control of greenhouse is reliable with high precision and good real-time,and that meets the requirements of greenhouse cultivation and has a high value of application.
SoC Design of X86 Based on ARM Embedded Platform

白静,谢憬,毛志刚

DOI: https://doi.org/10.3969/j.issn.1004-373x.2009.08.011

2009-01-01

Abstract:Binary translation is an important technique to resolve the problem of code migration.A X86 to ARM binary translation system based on ARM embedded platform is put forward.The function of binary translation module,the architecture of SoC based on ARM embedded system,and the architecture and optimization of Multi-layer bus are introduced and analysed.In this SoC system,some X86 instructions can be translated into ARM instructions which executed by ARM processor.It could supply reference to hardware implementation of binary translation.
Core Software Technologies of the Embedded Systems Based on ARM and Linux

Bai Yongqiang,Liu Zhiyong,Sun Changsheng,Chen Jie

DOI: https://doi.org/10.3969/j.issn.1673-6524.2006.01.017

2006-01-01

Abstract:Firing position hand-held terminal set is designed based on S3C2410 ARM9 processor and Linux operating system.The set is consisted of kernel processor board,management circuit of power supply, LCD,touching screen,push-button and lithium battery etc. User operational interface is developed by means of simplified Linux system and MINIGUI.Structure and main content of software design include:establish Boot Loader program and add Linux kernel,compile Linux kernel and related root file system and so on.In the course of design,using ARM processor that opening feature is good and operation system is stable,developing difficulties both in software and hardware are greatly simplified,and reliability,expending capability and maintainability of the system are improved.
Design of New Modular Industrial Controller Based on Embedded Linux

CHEN Xi,LU Xiang-ye,LIU Yan-fang

DOI: https://doi.org/10.3969/j.issn.1002-1841.2010.11.010

2010-01-01

Abstract:Aimed at the increasing demands of variables in the industrial field.This paper proposed a modular design method of industrial controller.The main controller adopted ARM9 as the control core and embedded Linux operating system.Both the acquisition and control part were modular design of the conditioner,rectifier control circuit.Software designed HMI system with configuration control function.The controller is capable of processing and computing varieties of signals with high accuracy and speed.This paper focused on design of the main controller software and the development process by use Qt/E,a cross-platform development tools.

Uclinux Transplantion Based on ARM7TDMI

Software and hardware design of network static image transfer in the monitored control system based on ARM

Research on the Development of Embedded NC System Based on ARM Platform

Porting ARM Linux to EP7312

Transplanting uC/OS-Ⅱ kernel to FPGA-based CPU MiniArm

Transplantation and Application of Embedded OS Μc/os-Ii in ARM

ARM DEBUGGER BASED ON JTAG

Design of an Embedded Real-Time Operating System

Research on Embedded Linux Operating System

Turbine Condition Monitoring and Diagnosis System Based on ARM and Linux

The Design of MDF Remote Intelligent Supervisor System with S3C44B0X

Transplantation and debugging analysis of embedded Linux kernel based on S3C2440

Embedded Linux Transplantation

A research on realizing CT's forepart data-collecting system using interrupt technique based on an embedded system

The Design of Mobile Robot Based on S3C44B0X

Remote Data Terminal Based on Embedded System of ARM and uCLinux

LED Changing Message Sign System Based on ARM Uclinux

Intelligent Control System for Greenhouse Based on ARM+MCU

SoC Design of X86 Based on ARM Embedded Platform

Core Software Technologies of the Embedded Systems Based on ARM and Linux

Design of New Modular Industrial Controller Based on Embedded Linux