Abstract:This paper describes a multi-FPGA based platform for emulating the Loongson-2G micro-processor on different mother boards. This platform is developed targeting at verification and evaluation of the Loongson-2G micro-processor, which is the next generation of Loongson-2 family, composed by one four-issue, out-of-order execution way 64-bit MIPS-compatible processor core named GS464, one 1M byte secondary Cache, one HyperTransport IO interface, one DDR2/3 memory interface and some other low speed IO interfaces. Most parts of this micro-process are mapped into the multi-FPGA based platform which consists two Vertex-5 330 FPGA chips. Semi-custom partitioning tactics within the entire design flow are developed to synthesize the whole designed into the multi-FPGA based platform. Modifications in architectural level are applied to the original architecture of the chip, in order to make it easy to be partitioned into two parts. High speed SEDES of HyperTransport IO link and DDR2/3 memory interface are emulated by using several clocks with different clock phases. To resolve the problem that hard to debug in FPGA system, a method by software probe with help of injected hardware modules in FPGA is developed and used to debug the problem causing by behavior mismatching between the ASIC ram block and the FPGA ram block. Some evaluation work on performance of Loongson-2G is done on this multi-FPGA based platform as pre-silicon test. To the authors' knowledge, there has been no previous work on such a big design used for verification and evaluation.

Transplanting uC/OS-Ⅱ kernel to FPGA-based CPU MiniArm

Uclinux Transplantion Based on ARM7TDMI

A Hardware Non-Invasive Mapping Method for Condition Bits in Binary Translation

The Control System Based on ARM and Μc/os-Ii for Die-casting Machine

Porting ARM Linux to EP7312

Software and hardware design of network static image transfer in the monitored control system based on ARM

Cyborgan OS: A Lightweight Real-Time Operating System for Artificial Organ

Design of a Media-Enhanced and Reconfigurable RISC ,Microprocessor

Intelligent Door Control System Based on FPGA + ARM

Transport of Uc/os- Ⅱ on S3C44B0X Microprocessor

Vlsi Implementation of A High-Performance 32-Bit Risc Microprocessor

Industrial robot arm controller based on programmable System-on-Chip device

Transplantation and debugging analysis of embedded Linux kernel based on S3C2440

A multi-FPGA based platform for emulating a 100m-transistor-scale processor with high-speed peripherals (abstract only)

An Embedded System with Uclinux Based on FPGA

The Design of Mobile Robot Based on S3C44B0X

FPGA based hardware-software co-designed dynamic binary translation system

TransARM: an Efficient Instruction Set Architecture Emulator

An Emulator for Executing IA-32 Applications on ARM-Based Systems.

Implementation of μC/OS Task Scheduling Algorithm with Hardware Instruction

Porting for Using MicroC/OS-II with 80C196