Abstract:ABSTRACT With the acceleration of urbanization, the stability of the foundation is being more crucial to the performance and service of the superstructure. As our understanding of the factors influencing soil's physical and mechanical behavior deepens, it becomes increasingly challenging for traditional limit equilibrium and limit analysis methods to accurately consider the complex factors affecting foundation stability, such as initial fabric anisotropy caused by the particle morphology and geological deposition in sand. Although some scholars had used advanced constitutive models in the finite element method (FEM) to investigate the influence of initial fabric anisotropy on mechanical responses of foundations, this approach failed to reveal the microscopic information underlying the shear failure of sandy soil foundations. In this study, the influence of the initial fabric anisotropy of sandy soil on the ultimate bearing capacity and shear failure mode of shallow foundation is studied using the hierarchical FEM and discrete element method (DEM) coupling analysis method. Four representative volume elements (RVEs) with varying initial bedding plane angles are constructed in DEM for characterizing different initial fabric anisotropies, and the specific stress–strain information of DEM RVEs is directly passed into the corresponding Gauss points in FEM to replace the conventional constitutive model. Numerical results show that the initial fabric anisotropy affects the ultimate bearing capacity and shear failure mode of shallow foundations significantly, and the corresponding micromechanical behaviors at different local Gauss points have been explored, which advances our understanding of the micromechanisms underlying the progressive shear failure of sandy soil foundations significantly.

Elasto-Viscoplastic Simulation of Bearing Capacity Characteristics of Strip Footing on Reinforced Sand

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

Effect of Fabric Anisotropy on Bearing Capacity and Failure Mode of Strip Footing on Sand: an Anisotropic Model Perspective

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Multiscale Modelling and Analysis of Footing Resting on an Anisotropic Sand

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

AN ELASTOPLASTIC MODEL FOR SAND CONSIDERING DISTURBANCE

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Small Strain Path-Dependent Stiffness of Toyoura Sand: Laboratory Measurement and Numerical Implementation

Elasto-viscoplastic FEA of Reinforced Pavements under Traffic Loading

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Vertical Vibration of an Elastic Strip Footing on Saturated Soil

Rocking Vibration of a Rigid Strip Footing on Saturated Soil

Method of Rigorous Characteristics for Seismic Bearing Capacity of Strip Footings Placed Adjacent to Homogeneous Soil Slopes

A FEM‐DEM Coupling Analysis on Bearing Capacity of Sandy Soil Foundation Considering Fabric Anisotropy

Kinematic bearing capacity analysis of strip footings on reinforced soils using discretisation technique

Oblique and eccentric bearing capacity of embedded strip footings using the method of rigorous characteristics

Ultimate bearing capacity analysis of shallow strip footing based on second-order cone programming optimized incremental loading finite element method

Implementation of Fuzzy Reliability Analysis for Elastic Settlement of Strip Footing on Sand Considering Spatial Variability

Evolution Prediction of Hysteresis Behavior of Sand under Cyclic Loading