Abstract:High-density integration technologies with copper (Cu) through-silicon via (TSV) have emerged as viable alternatives for achieving the requisite integration densities for the portable electronics and micro-electro-mechanical systems (MEMSs) package. However, significant thermo-mechanical stresses can be introduced in integrated structures during the manufacturing process due to mismatches of thermal expansion and the mechanical properties between Cu and silicon (Si). The high-density integration demands an interconnection material with a strong mechanical strength and small thermal expansion mismatch. In this study, a novel electroplating method is developed for the synthesis of a graphene-copper (G-Cu) composite with electrochemically exfoliated graphenes. The fabrication and evaluation of the G-Cu composite microstructures, including the microcantilevers and micromirrors supported by the composite, are reported. We evaluated not only the micromechanical properties of the G-Cu composite based on in-situ mechanical resonant frequency measurements using a laser Doppler vibrometer but also the coefficients of thermal expansion (CTE) of the composite based on curvature radius measurements at a temperature range of 20-200 °C. The Young's modulus and shear modulus of the composite are approximately 123 and 51 GPa, which are 1.25 times greater and 1.22 times greater, respectively, than those of pure Cu due to the reinforcement of graphene. The G-Cu composite exhibits a 23% lower CTE than Cu without sacrificing electrical conductivity. These results show that the mechanically strengthened G-Cu composite with reduced thermal expansion is an ideal and reliable interconnection material instead of Cu for complex integration structures.

Design and Simulation of A Non-Silicon Composite Interposer with Reinforced Structure

Fabrication and performances of a novel copper-ordered-reinforced polymer composite interposer

Simulation of Stiffness and Thermal Conductivity of Ordered Metal Microstructure Reinforced Polymer Composite Interposer

A complex reinforced polymer interposer with ordered Ni grid and SiC nano-whiskers polyimide composite based on micromachining technology

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Development of a Polyimide/SiC-Whisker/Nano-Particles Composite with High Thermal Conductivity and Low Coefficient of Thermal Expansion As Dielectric Layer for Interposer Application

Double-Shielded Interposer with Highly Doped Layers for High-Speed Signal Propagation

Electrical Simulation and Analysis of Si Interposer for 3d Ic Integration

Design and Characterization of Petaloid Hollow Cu Interconnection for Interposer

Interposer Fabrication with Annular Copper Tsv and Multi-Layered Redistribution Layer

Modeling and fabrication of the redistribution layer on the 2.5D Si interposer

Preparation and Characterization of High Thermal Conductivity and Low CTE Polyimide Composite Reinforced with Diamond Nanoparticles/SiC Whiskers for 3D IC Interposer RDL Dielectric

Modeling and Measurement of A Novel Shielding Design in Silicon Interposer

Design and optimization of composite sub-stiffened panels

Mechanically strengthened graphene-Cu composite with reduced thermal expansion towards interconnect applications

Study On Electrical Performance Of Stacking Die Package With Silicon Interposer

Design and fabrication of a TSV interposer for SRAM integration

Fabrication and RF Property Evaluation of High-Resistivity Si Interposer for 2.5-D/3-D Heterogeneous Integration of RF Devices

Research on Simulation of Cu/SiO2 Hybrid Bonding Process and Interface Failure Mechanism by Finite Element Analysis

Simulation Of Fast Room-Temperature Bonding By Mechanical Interlock Structure Applied For 3d Integration

Failure simulation and design optimization of bioinspired heterogeneous interfaces by Floquet-based bar-spring model