Abstract:In this article, Y2O3-reinforced tungsten composites are fabricated by using an improved wet chemical method combined with the spark plasma sintering (SPS). Triethanolamine (TEA) surfactant addition and an appropriate calcination process are innovatively introduced into this wet chemical method. The results show that ultrafine composite powders with nano-sized Y2O3 dispersions in the tungsten matrix can be obtained through the improved wet chemical method. Using the SPS, the average sizes of Y2O3 particles within tungsten grains and at grain boundaries are identified to be 13.5 and 50 nm, respectively. It is found that the phase interface between W and Y2O3 is a typical semicoherent interface. We observe that the W-Y2O3 composites possess superior mechanical properties compared with the pure tungsten counterparts. The results inferred from atomistic simulations reveal that the added Y2O3 particles can effectively pin the dislocation and impede the dislocation movement, thus enhancing the mechanical performances of W-Y2O3 composites. In addition, the addition of Y2O3 particles is also able to improve the helium ion irradiation resistance of tungsten-based composites. This study is expected to provide a certain reference for the manufacture of large-sized tungsten-based materials.

Preparation And Characterization Of Yttrium-Doped Tungsten Powders For Magnetron Cathode

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Studies of the Influence of ZrH2 Addition to the Impregnant on the Performance of Yttrium Oxide–Tungsten Matrix Ba Dispenser Cathodes

Study on the preparation and emission property of pressed barium-tungsten cathode doped with Y2O3

Fabrication and characterization of pressed Y 2O 3 doped Ba-W dispenser cathode

Studies on the Pressed Yttrium Oxide-Tungsten Matrix As A Possible Dispenser Cathode Material

Fabrication and characterization of pressed Y<inf>2</inf>O<inf>3</inf> doped Ba-W dispenser cathode

Study on Preparation of Yttrium Oxide with Large Particle Sizes and Spherical Shapes by Precipitation with Ammonium Bicarbonate

Fabrication and Characterization of Pressed Y<inf>2</inf>O<inf>3</inf> Doped Ba-W Dispenser Cathode

Effect of Yttrium Doping on the Formation and Stability of Β‑tungsten Powder

Preparation and Characterization of Impregnated Y2O3-W Matrix Scandate Cathode

Preparation and Characterization of Scandia-Doped Tungsten Powders Prepared by a Spray-Drying Method

Preparation And Characterization Of Nano-Yb2o3/Tio2 Particles

Preparation and Characterization of Y3Al5O12:Nd Phosphor Powders by Ultrasonic Atomization and Co-precipitation Process

Research on Preparation of Scandium-Doped Tungsten Powders

Preparation and Thermal Shock Characterization of Yttrium Doped Tungsten-Potassium Alloy

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

Preparation and Characterisation of Scandia Doped Dispenser Cathodes

The superior thermal stability and irradiation resistance capacities of tungsten composites synthesized by simple second-phase particle component modulation

Sc2o3-y2o3 Co-Doped W Matrix Dispenser Cathode

Optimization of Yb2O3-Gd2O3-Y2O3 Co-Doped ZrO2 Agglomerated and Calcined Powders for Air Plasma Spraying