Abstract:The process of reduction roasting followed by low-intensity magnetic separation are usually used to recover nickel and iron from laterite ores. In order to strengthen the selective reduction of nickel in laterite ore,the effect of damp mill-ings for the mixture of a laterite ore,coal as a reductant,and sodium sulfate as an additive on selective reduction of nickel in the sample ore and its mechanism were investigated. The results showed that:① Within the fineness range of damp millings, damp millings was favorable to strengthen the selective reduction. When the fineness of the mixture is increased from -0. 074 mm of 52. 00% to -0. 074 mm of 75. 49%,nickel grade of the Ni-Fe product is improved from 6. 58% to 9. 27%,and the grade of the Ni-Fe product increased from three levels to a specific pole,accompanied with nickel recovery rate increasing from 91. 56% to 95. 57% and differences in nickel and iron recovery rising from 54. 30% to 68. 52%.②Damp millings made the particle size of the sample be reduced and the fresh surface of the nickel ore was sufficiently exposed,making the sample ore, lignite,and sodium sulfate being fully mixed. It improved the contact reaction probability of target minerals,lignite and sodium sulfate,contributing to strengthening the selective reduction of nickel.③Damp milling had no obvious influence on mineral composition of the roasted ores but remarkably affect the microstructure of roasted ore,which promoted aggregation of the fine Ni-Fe particles and was beneficial to realize monomer dissociation for the Ni-Fe particles during subsequent magnetic separa-tion.④Sum of nickel and iron grades was only 80. 33% with damp milling for the mixture fineness at-0. 074 mm of 75. 49%, because there were intergrowth and mechanical impurity inclusion in the Ni-Fe product,and the phenomenon of carburization of ferronickel particles existed. The former can be reduced through a two-section grinding and low-intensity magnetic concentration process,but the latter is difficult to avoid.

Improving the Beneficiation of Low‐Grade Saprolitic Nickel Laterite by Reduction Roasting in the Presence of Additives

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Preparing Ferro-Nickel Alloy from Low-Grade Laterite Nickel Ore Based on Metallized Reduction–Magnetic Separation

Extraction of ferronickel concentrate from laterite nickel ore by reduction roasting-magnetic separation using spent cathode carbon

Research on the effect of additive on selective reduction of the laterite ores with low nickel and high iron content

Characterization of fluidized reduction roasting of nickel laterite ore under CO/CO2 atmosphere

Recovery of Nickel and Iron from Low–grade Laterite Ore and Red Mud Using Co–reduction Roasting: Industrial-scale Test

Reductive behavior of nickel and iron metallization in magnesian siliceous nickel laterite ores under the action of sulfur-bearing natural gas

Mechanism of Calcium Sulphate on the Aggregation and Growth of Ferronickel Particles in the self-Reduction of Saprolitic Nickel Laterite Ore

Efficient Enrichment of Nickel and Iron in Laterite Nickel Ore by Deep Reduction and Magnetic Separation

Enhancement of Nickel Extraction from Laterite in Hydrochloride Acid Through Activated Roasting

Insight of Reduction Roasting of a Low-Grade Goethitic Indian Iron Ore in a Rotary Kiln: Process Optimization and Characterization

A Robust Recovery of Ni From Laterite Ore Promoted by Sodium Thiosulfate Through Hydrogen-Thermal Reduction

Efficient Utilization of Limonite Nickel Laterite to Prepare Ferronickel by the Selective Reduction Smelting Process

Extraction of Nickel from Garnierite Laterite Ore Using Roasting and Magnetic Separation with Calcium Chloride and Iron Concentrate

Effects of direct reduction process on the microstructure and reduction characteristics of carbon-bearing nickel laterite ore pellets

Intensifying the Selective Sulfidation of Nickel in Saprolitic Laterites by Sodium Salts

Pre-treatment through reductive calcination for CO 2 mineralization and selective battery metal extraction from laterites

Effects and Mechanism of Damp Milling on Selective Reduction of Lateritic Ore

A Novel Utilization of Bayer Red Mud Through Co-Reduction with a Limonitic Laterite Ore to Prepare Ferronickel

Study on the Medium-Temperature Reduction Behavior of Methane and Laterite Nickel Ore