Abstract:Abstract Liquid-assisted laser ablation has the advantage of relieving thermal effects of common laser ablation processes, whereas the light scattering and shielding effects by laser-induced cavitation bubbles, suspended debris, and turbulent liquid flow generally deteriorate laser beam transmission stability, leading to low energy efficiency and poor surface quality. Here, we report that a continuous and directional high-speed microjet will form in the laser ablation zone if laser-induced primary cavitation bubbles asymmetrically collapse sequentially near the air-liquid interface under a critical thin liquid layer. The laser-induced microjet can instantaneously and directionally remove secondary bubbles and ablation debris around the laser ablation region, and thus a very stable material removal process can be obtained. The shadowgraphs of high-speed camera reveal that the average speed of laser-induced continuous microjet can be as high as 1.1 m s −1 in its initial 500 μ m displacement. The coupling effect of laser ablation, mechanical impact along with the collapse of cavitation bubbles and flushing of high-speed microjet helps achieve a high material removal rate and significantly improved surface quality. We name this uncovered liquid-assisted laser ablation process as laser-induced microjet-assisted ablation (LIMJAA) based on its unique characteristics. High-quality microgrooves with a large depth-to-width ratio of 5.2 are obtained by LIMJAA with a single-pass laser scanning process in our experiments. LIMJAA is capable of machining various types of difficult-to-process materials with high-quality arrays of micro-channels, square and circle microscale through-holes. The results and disclosed mechanisms in our work provide a deep understanding of the role of laser-induced microjet in improving the processing quality of liquid-assisted laser micromachining.

Excimer Laser Deep Micro-Structuring for Liga Process

High Throughput Laser Nano Direct Writing Technique

Microfabrication Assisted by Laser-Trapped Microparticle Tools

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

A New Application Field of Synchrotron Radiation Lithography--liga Technique

Photothermal Microactuators Fabricated by LIGA Technology

Quasi-LIGA process using multilayer photoresist technology

Laser-Driven Micro Transfer Placement of Prefabricated Microstructures

3D Microstructure Manufacture Based on Laser-Induced Thermoplastic Expansion

Fabrication of microstructures by picosecond laser

Laser Direct Writing for Micromachining of Freeform Surface on n-Type GaAs via Photoelectrochemical Etching

Mirostructure fabrication and research used the excimer laser microprocessing

Dry-etching-assisted femtosecond laser machining

Dry‐etching‐assisted Femtosecond Laser Machining (laser Photonics Rev. 11(3)/2017)

Dynamically Taming Focal Fields of Femtosecond Lasers for Fabricating Microstructures

Tailoring Sub-micrometer Periodic Surface Structures via Ultrashort Pulsed Direct Laser Interference Patterning

Advanced 3D micromachining techniques using UV laser sources

The Fabrication of Micro/Nano Structures by Laser Machining

Single-pulse Writing of a Concave Microlens Array.

Laser-induced microjet-assisted ablation for high-quality microfabrication

Etching-assisted Femtosecond Laser Microfabrication