Abstract:The objectives of this study are to optimize the key process parameters of laser cladding remanufacturing parts, improve the sealing quality of the hemispherical valve and prolong and improve its service life and reliability. A high-power fiber-coupled semiconductor laser was used to fabricate a single Co-based alloy cladding layer on the pump valve material ZG45 plate. The key process parameters of laser power, scanning speed and powder feeding rate in the process of laser remanufacturing are taken as optimization variables, and the coating width, coating height, coating depth, aspect ratio and dilution rate are taken as response indexes. Based on the response surface analysis method, the central compound experiment is designed using Design-Expert software. The variance analysis of the experimental results is performed, and the regression prediction model of the process parameters relative to the corresponding index is established. Through analysis of the established perturbation diagram and three-dimensional response surface, it is concluded that the main influence factors of melting width and penetration depth are laser power and positive effect, and the main influence factors of melting height are scanning speed and negative effect. The average error of each regression prediction model is lower than 10%. The above research work has important guiding significance for optimizing the process parameters and improving the cladding quality of cobalt-based alloy on ZG45.

Optimization And Elimination Of "Black Center" Of A Large-Bore Copper Vapor Laser

Kinetic analysis of the factors limiting the output power of the Ne–CuBr UV laser

Sub-diffraction Optical Beam Lithography Based on a Center-Non-zero Depletion Laser

Optimal design for a copper vapor laser with a maximum output by using a genetic algorithm

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Parametric Optimization of Interactive Circuit for Metal Vapor Lasers

A Global Optimization and Design of a Copper Vapor Laser with 100 W Order for Obtaining Maximum Output

Optimization of LC circuit parameters for obtaining maximum output of a copper vapor laser by a genetic algorithm

Optimization of lasing in semiconductor micro -stadiums

Optimization of a sealed-off CO2 laser resonator by utilizing a genetic algorithm

Numerical Study on the Terminating Mechanisms of Copper Vapor Laser Pulse

Determination of Capacitances and Inductances of A Discharge Circuit for A Copper Vapor Laser by Using A Genetic Algorithm

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Optimization of Three Gas Compositions in a CO2 Laser

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Elimination of Spatial Hole Burning in Microlasers for Stability and Efficiency Enhancement

The parameter optimization of CO2 laser during drilling blind-vias.by simplex optimization

Cavity configurations for copper vapour laser pumped titanium sapphire lasers

Design, Optimization, and Blackbox Optimization of Laser Systems

Estimation, Optimization, and Performance of Layered Thermal Insulation Structure in a Wide Aperture Gas Discharge Copper Vapour Laser Assembly

Optimization of Beam Configuration in Laser Fusion Based on the Laser Beam Pattern