Abstract:In order to achieve the highest peak power of radiation pulse and highest output energy, the primary circuit parameters are investigated to optimize the discharge circuit performance of the laser. The structure and the discharge circuit of the laser are discussed at first. To realize synchronous discharge in two discharge channels, the conjunct electrode device for two pairs of discharge electrodes is designed. Finally, the results of the experiments on the primary circuit parameters are given. The discharge is most stable at a pressure of 5.33 x 10(4)Pa when the pressure of gaseous mixture CO2:N-2:He=1:1:3 is changed from 2.67 x 10(4) Pa to 6.67 x 10(4) Pa. The ratio of storage capacitance to peak capacitance is chosen to be about 1.5-7/3, because residual voltage is lower on this condition and residual voltage is adverse to discharge. When the inductance 330 mu H is used, the homogeneous glow discharge in a widest voltage range is obtained. The duration of charge and discharge and the magnitude of residual voltage decrease when the stimuli voltage is increased in homogeneous glow discharge condition. The discharge circuit allows the homogeneous glow discharge in a wide range of pressure of gaseous mixture when these circuit parameters are used. Thus it offers reference to the improvement of output characteristic of TEA CO2 laser with two discharge channels.

Optimization of LC circuit parameters for obtaining maximum output of a copper vapor laser by a genetic algorithm

Parametric Optimization of Interactive Circuit for Metal Vapor Lasers

Determination of Capacitances and Inductances of A Discharge Circuit for A Copper Vapor Laser by Using A Genetic Algorithm

Optimal design for a copper vapor laser with a maximum output by using a genetic algorithm

Kinetic analysis of the factors limiting the output power of the Ne–CuBr UV laser

Modeling of a diode transverse-pumped cesium vapor laser

A kinetic model for optically pumped cesium vapor laser

Influences of Operating Parameters on Deleterious Processes of Side-Pumped Cesium Vapor Laser Amplifiers with Flowing Medium

A Global Optimization and Design of a Copper Vapor Laser with 100 W Order for Obtaining Maximum Output

Pulsed Barium Vapor Laser with Hydrogen Additive and Interactive Circuit

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

Characteristics of a cataphoresis He-Ca + recombination laser

Optimization And Elimination Of "Black Center" Of A Large-Bore Copper Vapor Laser

Optimization of a sealed-off CO2 laser resonator by utilizing a genetic algorithm

A-LOC GaAlAs/GaAs laser and its characteristics

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

Analysis and experiment of A-LOG GaAlAs/GaAs laser

Optimization of Three Gas Compositions in a CO2 Laser

Optimization of Discharge Circuit of the Tea Co2 Laser with Two Discharge Channels

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Optimization of Tunable Semiconductor V-cavity Laser for Analog Application