Abstract:In order to achieve the highest peak power of radiation pulse and highest output energy, the primary circuit parameters are investigated to optimize the discharge circuit performance of the laser. The structure and the discharge circuit of the laser are discussed at first. To realize synchronous discharge in two discharge channels, the conjunct electrode device for two pairs of discharge electrodes is designed. Finally, the results of the experiments on the primary circuit parameters are given. The discharge is most stable at a pressure of 5.33 x 10(4)Pa when the pressure of gaseous mixture CO2:N-2:He=1:1:3 is changed from 2.67 x 10(4) Pa to 6.67 x 10(4) Pa. The ratio of storage capacitance to peak capacitance is chosen to be about 1.5-7/3, because residual voltage is lower on this condition and residual voltage is adverse to discharge. When the inductance 330 mu H is used, the homogeneous glow discharge in a widest voltage range is obtained. The duration of charge and discharge and the magnitude of residual voltage decrease when the stimuli voltage is increased in homogeneous glow discharge condition. The discharge circuit allows the homogeneous glow discharge in a wide range of pressure of gaseous mixture when these circuit parameters are used. Thus it offers reference to the improvement of output characteristic of TEA CO2 laser with two discharge channels.

Parametric Optimization of Interactive Circuit for Metal Vapor Lasers

Kinetic analysis of the factors limiting the output power of the Ne–CuBr UV laser

Simulation and Comparison of Discharge Cirsuits for Metal Vapor Lasers

Modeling of a diode transverse-pumped cesium vapor laser

Pulsed Barium Vapor Laser with Hydrogen Additive and Interactive Circuit

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

A kinetic model for optically pumped cesium vapor laser

Three-Dimensional Kinetic and Fluid Dynamic Modeling and Three Iterative Algorithms for Side-Pumped Alkali Vapor Lasers

Influence of Cataphoresis on Metal Vapor Distribution in High Repetition Rate Pulsed Discharge Metal Vapor Lasers

Numerical Simulations on a Nanosecond-Pulse Exciplex Pumped Cesium Vapor Laser

Modeling of an alkali vapor laser MOPA system

Numerical study on parameters for a longitudinal pulsed discharge Ne-CuBrUV laser

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

Optimization of LC circuit parameters for obtaining maximum output of a copper vapor laser by a genetic algorithm

Determination of Capacitances and Inductances of A Discharge Circuit for A Copper Vapor Laser by Using A Genetic Algorithm

Effects of tunable circuit parameters on pulsed discharge and input-output characteristics of a XeCl excimer laser

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Numerical Study on the Terminating Mechanisms of Copper Vapor Laser Pulse

Optimization of Discharge Circuit of the Tea Co2 Laser with Two Discharge Channels

Dynamic model for CuBr UV laser

Optimization of Passively Q-switched Nd:YAG/Cr:YAG Microchip Lasers and Experiments