Abstract:The pulverised coal combustion and coke combustion in the raceway of an ironmaking blast furnace (BF) is the key to stable and efficient BF operation, especially under various blast conditions, yet their dynamic behaviour is still unknown. In this study, a three-dimensional transient CFD model is developed to investigate the impacts of the variation of key blast conditions on the in-furnace phenomena in an industrial scale BF. This model integrates the two-fluid model and discrete particle model to simulate the dynamic raceway and co-combustion of coke and pulverised coal in the lower part of the BF. A set of blast operating schemes, i.e., blast rate and oxygen enrichment, are numerically examined to illustrate and quantify their influence on the raceway evolution and combustion of coal and coke, respectively. The simulation results show that a higher blast rate benefits the formation of a larger raceway, i.e., with the rising blast velocity, from 90 m/s to 180 m/s, the raceway is expanded in terms of depth (0.4 m to 1.1 m), width (0.13 m to 0.44 m), and height (0.23 m to 0.76 m), which indirectly contributes to enhancing the combustion of coal and coke. The oxygen enrichment operation is also helpful to the co-combustion of coke and coal and increases the internal and surrounding temperature of the raceway, which produces more reducing gas for the BF. The average coal burnout rate is enhanced by 15 % after the blast rate is raised from 90 m/s to 180 m/s and the oxygen mass fraction is raised from 25 % to 35 %. This study offers a cost-effective tool to understand and optimise the blast operations toward stable and efficient BF operation.

A 3D CFD Simulation of Liquid Flow in an Ironmaking Blast Furnace

Three-Dimensional Modeling of an Ironmaking Blast Furnace with a Layered Cohesive Zone

Computational Study of Hot Gas Injection (HGI) into an Ironmaking Blast Furnace (BF)

Comprehensive Numerical Modeling of Raceways in Blast Furnaces

Three-dimensional Modelling of Coal Combustion in Blast Furnace

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Numerical Simulation of Multiphase Flow in Ironmaking Process for Oxygen-Rich Side-Blown Bath Smelting Furnace

Review on Modeling and Simulation of Blast Furnace

Computational Fluid Dynamics Simulation of Gas–Matte–Slag Three-Phase Flow in an ISASMELT Furnace

Numerical Simulation Model for Evaluating Protection Measures of Blast Furnace Hearth

CFD-DEM Study on the Synergistic Effect of Coke Consumption and Particle Dynamics in the Blast Furnace Raceway

Transient 3D CFD study of pulverised coal combustion and coke combustion in a blast furnace: Effect of blast conditions

CFD-DEM simulation of raceway size and mechanical characteristics of industrial scale blast furnace

Influences of Scaffold and Coal Injection on Gas and Liquid Flow Distributions in Blast Furnace: Mathematical Model

2D Modelling and Simulation of Heat Transfer in Blast Furnace Hearth Using ANSYS

3D CFD Model of Ladle Heat Transfer With Gas Injection

Numerical Simulation of Bubble and Velocity Distribution in a Furnace

Computational Fluid Dynamics Study of the Flow and Thermochemical Behaviors of a Carbon Composite Briquette in an Ironmaking Blast Furnace

Numerical simulation and optimization of steel tube billet heating process in rotary hearth furnace using CFD

Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

Numerical Simulation of Temperature Field in Blast Furnace Gas Regenerative Furnace