Abstract:We show that the indentation size effect for crystalline materials can be accurately modeled using the concept of geometrically necessary dislocations. The model leads to the following characteristic form for the depth dependence of the hardness:H/H-0 = root 1 + h*/h,where H is the hardness for a given depth of indentation. h, H-0 is the hardness in the limit of infinite depth and h* is a characteristic length that depends on the shape of the indenter, the shear modulus and H-0. Indentation experiments on annealed (111) copper single crystals and cold worked polycrystalline copper show that this relation is well-obeyed. We also show that this relation describes the indentation size effect observed for single crystals of silver.We use this model to derive the following law for strain gradient plasticity:(sigma/sigma(0))(2) = 1 + (l) over cap chi,where sigma is the effective flow stress in the presence of a gradient, sigma(0) is the how stress in the absence of a gradient, chi is the effective strain gradient and (l) over cap is a characteristic material length scale, which is, in turn, related to the flow stress of the material in the absence of a strain gradient,(l) over cap approximate to b (mu/sigma(0))(2).For materials characterized by the power lawsigma(0) = sigma(ref)epsilon(l/n),the above law can be recast in a form with a strain-independent material length scale l,(sigma/sigma(ref)) = epsilon(2/n+)l chi l = b (mu/sigma(ref))(2) = (l) over cap (sigma(0)/sigma(ref))(2).This law resembles the phenomenological law developed by Fleck and Hutchinson, with their phenomenological length scale interpreted in terms of measurable material parameters. (C) 1998 Elsevier Science Ltd. All rights reserved.

A Study on Length Scale Effects on Indentation Delamination of Thin Films

Indentation Size Effect: A Study Via The Mechanism-Based Strain-Gradient Plasticity Theory

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

A Cohesive-Zone-Based Contact Mechanics Analysis of Delamination in Homogeneous and Layered Half-Spaces Subjected to Normal and Shear Surface Tractions

Buckle-driven Delamination of Thin Film and the Influence of the Casimir or Van Der Waals Force Interaction

Size effects on the onset of plastic deformation during nanoindentation of thin films and patterned lines

A Simply Analytic Study of Buckled Thin Films on Compliant Substrates

Wedge Indentation of a Thin Film on a Substrate Based on Micromorphic Plasticity

MULTISCALE SIMULATION OF NANOINDENTATION ON Al THIN FILM

The Role of Intrinsic Material Length Scales in Micro-Indentation Simulations

Analysis of Size Effects Based on A Symmetric Lower-Order Gradient Plasticity Model

Modeling the buckling and delamination of thin films

Lateral indentation of a thin elastic film

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Size-Dependent Analysis of Strain Energy Release Rate of Buckling Delamination Based on the Modified Couple Stress Theory

Multi-scale Indentation Model of Stiff Film-Compliant Substrate Structures

Elastic Contact Versus Indentation Modeling of Multilayered Materials

Study of size effects in thin films by means of a crystal plasticity theory based on DiFT

Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity

Numerical Investigation on the Loading-Delamination-unloading Behavior of Adhesive Joints