Abstract:We show that the indentation size effect for crystalline materials can be accurately modeled using the concept of geometrically necessary dislocations. The model leads to the following characteristic form for the depth dependence of the hardness:H/H-0 = root 1 + h*/h,where H is the hardness for a given depth of indentation. h, H-0 is the hardness in the limit of infinite depth and h* is a characteristic length that depends on the shape of the indenter, the shear modulus and H-0. Indentation experiments on annealed (111) copper single crystals and cold worked polycrystalline copper show that this relation is well-obeyed. We also show that this relation describes the indentation size effect observed for single crystals of silver.We use this model to derive the following law for strain gradient plasticity:(sigma/sigma(0))(2) = 1 + (l) over cap chi,where sigma is the effective flow stress in the presence of a gradient, sigma(0) is the how stress in the absence of a gradient, chi is the effective strain gradient and (l) over cap is a characteristic material length scale, which is, in turn, related to the flow stress of the material in the absence of a strain gradient,(l) over cap approximate to b (mu/sigma(0))(2).For materials characterized by the power lawsigma(0) = sigma(ref)epsilon(l/n),the above law can be recast in a form with a strain-independent material length scale l,(sigma/sigma(ref)) = epsilon(2/n+)l chi l = b (mu/sigma(ref))(2) = (l) over cap (sigma(0)/sigma(ref))(2).This law resembles the phenomenological law developed by Fleck and Hutchinson, with their phenomenological length scale interpreted in terms of measurable material parameters. (C) 1998 Elsevier Science Ltd. All rights reserved.

The Role of Intrinsic Material Length Scales in Micro-Indentation Simulations

Identification of the Intrinsic Material Length in Gradient Plasticity Theory from Micro-Indentation Tests

Computational Simulations of Micro-Indentation Tests Using Gradient Plasticity

Indentation Size Effect: A Study Via The Mechanism-Based Strain-Gradient Plasticity Theory

Analysis of Size Effects Based on A Symmetric Lower-Order Gradient Plasticity Model

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

The Effect of Indenter Angle on the Microindentation Hardness

A study of microindentation hardness tests by mechanism-based strain gradient plasticity

Influence of the Mechanical Properties of Elastoplastic Materials on the Nanoindentation Loading Response

A Micro‐mechanical Damage Model Based on Gradient Plasticity: Algorithms and Applications

A Study on Length Scale Effects on Indentation Delamination of Thin Films

Comparison of Computational Predictions of Material Failure Using Nonlocal Damage Models

A Numerical Study of Indentation with Small Spherical Indenters

Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

A Finite Deformation Theory of Strain Gradient Plasticity

Crystal plasticity assessment of the effect of material parameters on contact depth during spherical indentation

The indenter tip radius effect in micro- and nanoindentation hardness experiments.

The Strain Gradient Effects in Micro-Indentation Hardness Experiments

The Influence of Indenter Tip Radius on the Micro-Indentation Hardness