Abstract:In part I of this paper (Cao and Lu, J. Mech. Phys. Solids, in press), a closed-form expression of the size-dependent sharp indentation loading curve has been proposed. In this second part, which concerns the direct application of the analytical model, a reverse algorithm has first been established to extract the plastic properties of metallic materials on a small scale where the size effect caused by geometrically necessary dislocations is significant. Second, from the viewpoint of the mathematical theory of inverse problems, the properties of the present inverse problem i.e. the existence, uniqueness and stability of the solution, have been investigated systematically. The results have identified the extent to which the plastic properties of ductile materials can be determined effectively using the present method. Third, experimental verifications of the reverse algorithm using a standard Berkovich indenter have been carried out for 316 stainless steel and pure titanium, respectively. The results show that, by taking a maximum indentation depth of 1.5 and 0.8μm, respectively for the two materials, a good engineering estimation of the representative stresses, σ0.033, in the absence of a strain gradient can be made using the present method, which can be used in conjunction with the representative stress corresponding to another indenter with a different tip apex angle to determine the plastic properties of metallic materials, i.e. the yield strength σy and the strain hardening exponent n. The material length scale l^ can also be identified by using the present algorithm. Experimental results show that it has the correct order of magnitude, but is more sensitive to data errors than the identified representative stress.

Identification of the Intrinsic Material Length in Gradient Plasticity Theory from Micro-Indentation Tests

The Role of Intrinsic Material Length Scales in Micro-Indentation Simulations

Computational Simulations of Micro-Indentation Tests Using Gradient Plasticity

Analysis of Size Effects Based on A Symmetric Lower-Order Gradient Plasticity Model

Indentation Size Effect: A Study Via The Mechanism-Based Strain-Gradient Plasticity Theory

Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity

A study of microindentation hardness tests by mechanism-based strain gradient plasticity

The Strain Gradient Effects in Micro-Indentation Hardness Experiments

A Micro‐mechanical Damage Model Based on Gradient Plasticity: Algorithms and Applications

The Effect of Indenter Angle on the Microindentation Hardness

A Finite Deformation Theory of Strain Gradient Plasticity

Effect of Intrinsic Lattice Resistance in Strain Gradient Plasticity

Comparison of Computational Predictions of Material Failure Using Nonlocal Damage Models

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

Size-dependent sharp indentation-II: a reverse algorithm to identify plastic properties of metallic materials

Determine the unique constitutive properties of elastoplastic materials from their plastic zone evolution under nanoindentation

A Numerical Study of Indentation with Small Spherical Indenters

New expanding cavity model for conical indentation and its application to determine an intrinsic length scale of polymeric materials

Cyclic plastic behavior analysis based on the micromorphic mixed hardening plasticity model

Investigations of Size Effects in Tensile Tests Based on a Nonlocal Micro-Mechanical Damage Model