Abstract:Micro-electro-mechanic-system (MEMS) devices on flexible substrate are important for non-planar and non-rigid surface applications. In this paper, a novel and cost-effective fabrication process for an 8×8 MEMS temperature sensor array with a lateral dimension of 2.5mm×5.5mm on a polyimide flexible substrate is developed. A 40μm thick polyimide substrate is formed on a rigid silicon wafer using as a mechanical carrier throughout the fabrication by four successive spin coating liquid polyimide. The arrayed temperature sensing elements made of 1200Å sputtered platinum thin film on polyimide substrate show excellent linearity with a temperature coefficient of resistance of 0.0028/°C. The purposed sensor obtains a high sensitivity of 0.781Ω/°C at 8mA at constant drive current. Because of the low heat capacity and excellent thermal isolation, the temperature sensing element shows excellent high sensitivity and a fast thermal response. The finished devices are flexible enough to be folded and twisted achieving any desired shape and form. Employing spin-coated liquid polyimide substrate instead of solid polyimide sheet minimizes the thermal cycling as well as improves the production yield. This fabrication technique first introduces the spin-coated PDMS (Polydimethylsiloxane) interlayer between the silicon carrier and the polyimide substrate and makes the polyimide-based devices separate much easier and greatly simplifies the fabrication process with a high production yield. A non-successive two-stage cure procedure for the polyimide precursor is developed to meet low-temperature requirement of the PDMS interlayer. The fabrication procedure developed in this research is compatible with conventional MEMS technology through an optimized integration process. The novel flexible MEMS technology can benefit the development of other new flexible polyimide-based devices.

A new method for measuring the temperature-dependent dielectric constant of the PDMS fluids

A New Method for Real-Time Measuring the Temperature-Dependent Dielectric Constant of the Silicone Oil

Microfluidic Temperature Sensor Based on Temperature-Dependent Dielectric Property of Liquid

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

A cost-effective flexible MEMS technique for temperature sensing

PDMS-Assisted Microfiber M-Z Interferometer with a Knot Resonator for Temperature Sensing

Temperature Compensation In Fluid Density Measurement Using Micro-Electromechanical Resonant Sensor

Highly Sensitive PDMS-filled Fabry-Perot Interferometer Temperature Sensor Based on the Vernier Effect.

PDMS-coated No-Core Fiber Interferometer with Enhanced Sensitivity for Temperature Monitoring Applications

Discharge Splicing-Free Ultra-Highly Sensitive Fiber-Optic Temperature Sensor Based on PDMS and the Vernier Effect

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

A Facile Strategy for Low Young's Modulus PDMS Microbeads Enhanced Flexible Capacitive Pressure Sensors

High-sensitivity Temperature Sensing by Employing an On-Chip High-Q PDMS-coated Toroidal Microcavity

High-sensitivity and Fast-Response Fiber-Optic Micro-Thermometer Based on a Plano-Concave Fabry-Pérot Cavity Filled with PDMS

PDMS-Based Capacitive Pressure Sensor for Flexible Transparent Electronics

Sensitivity-Enhanced Fabry-Perot Filled With Pdms Temperature Sensor Based On Vernier Effect

Fabrication and characterization of high-sensitivity, wide-range, and flexible MEMS thermal flow velocity sensors

Large-Area Conductor-Loaded PDMS Dielectric Composites for High-Sensitivity Wireless and Chipless Electromagnetic Temperature Sensors

Flexible Microwave Sensor Films Based on Nested-Complementary Split Ring Resonator for Liquid Dielectric Constant Detection

High-sensitivity temperature sensor based on PDMS-coated photonic crystal fiber interferometer

Micro-pressure Sensor Made of Conductive PDMS for Microfluidic Applications