Abstract:In present work, diamond/β-SiC composite interlayers were deposited on cemented tungsten carbide (WC-6%Co) substrates by microwave plasma enhanced chemical vapor deposition (MPCVD) using H2, CH4 and tetramethylsilane (TMS) gas mixtures. The microstructure, chemical bonding, element distribution and crystalline quality of the composite interlayers were systematically characterized by means of field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS), electron probe microanalysis (EPMA), Raman spectroscopy and transmission electron microscropy (TEM). The influences of varying TMS flow rates on the diamond/β-SiC composite interlayers were investigated. Through changing the TMS flow rates in the reaction gas, the volume fraction of β-SiC in the composite interlayers were tunable in the range of 12.0%–68.1%. XPS and EPMA analysis reveal that the composite interlayers are composed of C, Si element with little cobalt distribution. The better crystallinity of the diamond in the composite is characterized based on the Raman spectroscopy, which are helpful to deposit top diamond coatings with high quality. Then, the adhesion of top diamond coatings were estimated using Rockwell C indentation analysis, revealing that the adhesion of top diamond coatings on the WC-6%Co substrates can be improved by the interlayers with the diamond/β-SiC composite structures. Comprehensive TEM interfacial analysis exhibits that the cobalt diffusion is weak from WC-6%Co substrate to the composite interlayer. The homogeneous microcrystalline diamond coatings with the most excellent adhesion can be fabricated on the substrates with the composite interlayer with the β-SiC/diamond ratio of about 45%. The composite structures are appropriate for the application in high-efficiency mechanical tool as a buffer layer for the deposition of the diamond coating.

Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)

SINTERING AND TOUGHENING BEHAVIOR OF DENSE DIAMOND DISPERSED WC-10 Wt%co COMPOSITES

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Diamond–SiC nanocomposites sintered from a mixture of diamond and silicon nanopowders

CVD Synthesis of Nanometer SiC Coating on Diamond Particles

Mechanical Properties and Microstructures of HPHT Sintered Polycrystalline Diamond Compacts Reinforced with SiC Whiskers

Microstructure and Properties of Diamond/SiC Composites Via Hot Molding Forming and CVI Densifying

Preparation and characterization of high hard and high tough ultrafine WC ceramics containing hybrid graphene and SiC nanowire

Effect of Si-coated diamond on the relative density and thermal conductivity of diamond/W composites prepared by SPS

Effect of Nano-SiC Coating on the Thermal Properties and Microstructure of Diamond/al Composites

Effect of Diamond Content on Microstructure and Properties of Diamond/sic Composites Prepared by Tape-Casting and CVI Process

Preparation and Interfacial Microstructure of High Thermal Conductivity Diamond/sic Composites

Diamond Deposition on WC–Co Substrate with Amorphous SiC Interlayer

Superhard Composites of Cubic Silicon Nitride and Diamond

Microstructure, mechanical and friction-wear properties of SiC-WC composite with Al and C as sintering aids

Diamond/ Β -Sic Film As Adhesion-Enhanced Interlayer for Top Diamond Coatings on Cemented Tungsten Carbide Substrate

Mechanical Properties and Interface Microstructure of Fe-Ni-Wc-Based Impregnated Diamond Composite Reinforced by Mo2c Layer

Superhard Diamond/Tungsten Carbide Nanocomposites

WC–Si3N4 Composites Prepared by Two-Step Spark Plasma Sintering

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering