Abstract:The preforms were prepared with SiC and W-coated diamond reinforcements, and the diamond-SiC/Al com-posites were prepared by gas pressure infiltration technology at 800℃and 5 MPa. The properties of composite materi-als were analyzed by scanning electron microscope, infrared thermal imager and laser thermal conductivity meter. The influences of the content and the particle size ratio R of SiC and diamond on the configuration of composites were in-vestigated to optimize the thermal conductivity of the composites. The results show that with the same SiC particle size, the thermal conductivity of the composites will be significantly improved with the increase of diamond volume fraction. When the volume fraction of diamond is 30%, the thermal conductivity of the composites containing F100 SiC is the best, which reaches 344 W/(m?K). When the volume fraction of diamond is the same and the particle size ratio R in-creases from 0.07 to 0.65, the thermal conductivity of the composite increases in turn. Moreover, the thermal conductiv-ity of composites with diamond volume fraction of 15%increases from 174 W/(m?K) to 274 W/(m?K), which achieves the largest increase of 57%.Therefore, by improving the content and the particle size ratio of reinforcements in the dia-mond-SiC/Al composites, the configuration of composites can be regulated to realize full potential of thermal conductivity.

Microstructure and Properties of Diamond/SiC Composites Via Hot Molding Forming and CVI Densifying

Improvement on the Thermal Conductivity of Diamond/CVI-SiC Composites Using Large Diamond Particles

Microstructure and Properties of C/SiC-Diamond Composites Prepared by the Combination of CVI and RMI

Effect of Diamond Content on Microstructure and Properties of Diamond/sic Composites Prepared by Tape-Casting and CVI Process

Microstructure and properties of diamond/SiC composites prepared by tape-casting and chemical vapor infiltration process

Preparation and Interfacial Microstructure of High Thermal Conductivity Diamond/sic Composites

Research on maximizing the diamond content of diamond/SiC composite

Preparation and thermal conductivity of C/C composites filled with diamond particles

Effect of diamond content on microstructure and properties of C/SiC-diamond composites

Configuration Design and Thermal Conductivity of Diamond-Sic/al Composites

Microstructure evolution and thermal conductivity of diamond/SiC composites after heat treatment

Ultra-temperature performance characterization of additive manufactured diamond/SiC and carbon fiber/SiC composites

Preparation of bimodal-diamond/SiC composite with high thermal conductivity

Preparation of diamond/SiC composites by the liquid silicon infiltration method and their microstructure and properties

Microstructures and Mechanical Properties of Hot-Pressed -Matrix Composites Reinforced with SiC and Particles

Effect of Nano-SiC Coating on the Thermal Properties and Microstructure of Diamond/al Composites

Microstructure and Mechanical Properties of SiC P /sic and SiC W /sic Composites by CVI

Microstructure and Mechanical Properties of SiC F /sibcn Ceramic Matrix Composites

Effects of Diamond on the Mechanical Properties and Thermal Conductivity of Si3N4 Composites Fabricated Using Spark Plasma Sintering

Microstructure, mechanical properties and thermal conductivity of (Ti0.5Nb0.5)C–SiC composites

Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)