Abstract:Thermal quenching is one of the most critical challenges for the application of materials under high temperatures. Particularly, BaMgAl10O17:Eu2+ (BAM) has been well considered the preferred blue-emitting phosphor in tricolor fluorescent lamps, plasma display panels (PDP), and many other lighting and display devices due to its excellent luminescence efficiency and satisfactory chromaticity. However, its wide application range is still constrained by two major problems. Firstly, the synthesis temperature for BAM is too high. Commercial BAM materials are typically prepared with high-temperature solid-phase methods over 1550 degrees Ctemperatures. Secondly, co-solvent, which is added during the synthetic process to dissolve the solid phases, is prone to thermal deterioration. To tackle these problems, we propose the cationic substitution method combined with co-solvent assisted sintering to improve the thermal stability of BAM. In the end, we obtained a novel BAM material with a comparably lower synthesis temperature and satisfactory thermal stability. In our work, the thermal stability of BAM synthesized with 5% boric acid substituted by 0.08 mol Ca2+ was significantly higher compared with that synthesized without calcium substitution. Additionally, the activation energies (Delta E) of Ba0.92Ca0.08MgAl10O17: Eu2+ and Ba0.92Sr0.08MgAl10O17:Eu2+ were calculated to be approximately 0.26 eV and 0.35 eV, respectively, indicating that the BAM substituted with Sr2+ is more thermally stable.

Photoluminescence Properties of Ca-doped BaMgAl10O17:Eu2+,Mn2+ Blue Phosphor Using BaF2 and CaF2 As Co-Flux

BaMgAl10O17:Eu2+ Mn2+ Blue-Green Phosphor for White Light Emitting Diodes

Synthesis and luminous characteristics of Ba 3 CaSi 2-x Al x O 8 :Eu, Mn phosphor for white LED

Synthesis and luminous characteristics of Ba2MgSi2-xAlxO7: 0.1Eu2+, 0.1Mn2+ phosphor for WLED

Preparation and Luminescent Properties of BAM Blue Phosphor Forpdp and CCFL

Luminescence of Ba 0.85 MgAl 10 O 16.94 :Eu 2+ 0.09 with Different Fluxes

Luminescence of Ba0.85MgAl10O16.94:Eu 0.09 2+ with different fluxes

Luminescence of Ba0.85MgAl10O16.94 : EU0.092+ with different fluxes

Energy Transfer and Photoluminescence of BaMgAl10O17 Co-Doped with Eu2+ and Mn2+

Luminescence of Bax−0.05MgAl10O16+x: Eu2+0.05 with Different Ba2+ Content

BaMgAl10O17:Eu blue phosphors with MgO coating and microwave irradiation

Enhancing the Emission Intensity and Decreasing the Full Widths at Half Maximum of Ba3Si6O12N2:Eu(2+) by Mg(2+) Doping.

High Dispersibility and Enhanced Luminescence Properties of BaMgAl10O17:Eu2+ Phosphors Derived from Molten Salt Synthesis

Structure and Luminescence Properties of Bi3+ Activated Ca12Al14O32Cl2 Phosphors

Photoluminescence Properties of BaMgAl10O17:Eu2+ Phosphor Prepared by the Flux Method

Co-solvent-assisted Sintering and Thermal Stability Investment of BaMgAl10O17:Eu2+ by Cationic Substitution

Luminescence Properties of Ca2si5n8:Eu2+ Prepared by Gas-Pressed Sintering Using Baf2 As Flux and Cation Substitution

Enhanced Mn2+ emission from cation disordered substitution in Ba6CaNaYAl2Si6O24:Eu2+, Mn2+ phosphors

Luminescence and Morphology of BaMgAl10O17:Eu2+ Phosphors Prepared from Different Phases of Al2O3

Preparation and Luminescence Characteristics of Ba-1.97 Ca1-X (b3o6)(2) : Eu-0.03(2+), Mn-X(2+) Phosphor for White Led

Microstructure and Luminescence of Surface-Coated Nano-Bamgal10o17:Eu2+ Blue Phosphor