Abstract:When a flaw is detected in the stainless steel pipes at nuclear power plants during in-service inspections, the limit load estimation method provided in the codes such as JSME Rules on Fitness-for-Service for Nuclear Power Plants or ASME Boiler and Pressure Vessel Code Section XI can be applied to evaluate the integrity of the flawed pipe. However, in these current codes, the limit load estimation method is only derived for pipes containing a flaw with uniform depth, although many flaws with complicated shapes, such as stress corrosion cracks, have actually been detected in pipes. In order to evaluate the integrity of the flawed pipes in a more rational way, a limit load estimation method has been proposed by authors considering the complicated circumferential surface flaw in its shape. In this study, failure bending experiments are performed for stainless steel pipes containing a circumferential surface flaw with a complicated asymmetrical shape. The proposed method is verified by comparing with experimental results of failure bending moments obtained in this study and in previous experiments. It is observed that the predicted failure bending moments by the proposed method are consistent with the experimental results, and the proposed method is applicable to estimate the realistic load-carrying capacity of flawed pipes.

Analytical Limit Loads for Tube Sections with Circumferential Degradation

Low-Cycle Fatigue Damage of Circular Concrete-Filled-Tube Columns

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Limit Load Estimation Method for Pipe with an Arbitrary Shaped Circumferential Surface Flaw

Collapse Loads for Circumferentially Through-Wall Cracked Pipes Subjected to Combined Torsion and Bending Moments

Experimental Verification on Limit Load Estimation Method for Pipes with an Arbitrary Shaped Circumferential Surface Flaw

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Application Scope of Limit Load Criterion for Ductile Material Pipes with Circumferentially External Cracks

Failure Bending Moment for Pipes with an Arbitrary-Shaped Circumferential Flaw

Experimental Investigation on the Limit Load Estimation Method for Pipes Containing a Circumferential Surface Flaw with Complicated Shape

Inclusion of Torsion Loads in Section Xi Flaw Evaluation Procedures for Pipes Containing Circumferential Planar Surface Crack-Like Flaws on the Basis of Limit Load Analysis

Prediction of Collapse Stress for Pipes with Arbitrary Multiple Circumferential Surface Flaws

On the Limit Analysis of Defective Pipelines under Complex Loadings

Plastic Limit Load Analysis of Defective Pipelines

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Prediction of Failure Bending Moment for a Pipe with an Arbitrary-Shaped Circumferential Flaw

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Plastic Limit Analysis of Pipelines with Part-Through Slots

Allowable External Flaws and Acceptance Standards for High Toughness Ductile Pipes Subjected to Bending Moment and Internal Pressure