Abstract:In order to investigate influences of soil-structure interaction (SSI) on aseismic effect of viscous dampers in structures, shaking table tests for a steel frame energy-dissipating structure model with viscous dampers on rigid and pile group foundations were conducted.The similarity relationship between the original structure and the tested model was determined according to the dimensional analysis.The soil used in tests was silty clay and a laminar shear type soil box was adopted to reduce the boundary effect.The super-structure of the model was a 5-storey steel frame structure, its energy-dissipating elements were viscous dampers.The data of structural dynamic characteristics, floor accelerations and displacements of the model with and without viscous dampers under different seismic excitations and different base conditions were obtained with shaking table tests.For the pile group supported model, strains of plies and contact pressures of soil-pile interfaces were measured.The results indicated that for structures without viscous dampers, the damping ratio of the structure system has a considerable increase due to SSI effect;however, for structures with viscous dampers, SSI effect has little influence on the damping ratio of the structure system;SSI effect has a significant influence on floor acceleration responses, SSI effect reduces the seismic responses of the super-structure of the model, the larger the seismic inputs, the greater the SSI effect, the aseismic efficiency of dampers for pile group foundations has a bigger decline compared with that for rigid foundations;for structures on a pile group base, the viscous dampers can not only reduce seismic responses of the super structure, but also reduce those of the base, the safety of both the super structure and the base is improved.

Investigations of Shaking Table Test of Randomly Base-Excited Building Structures with MR Dampers

Shaking table test of damping ratio of strengthening-adding-story isolation structures

Shaking table test study of a RC frame with viscous damper

Shake table tests and numerical investigation of a resilient damping device for seismic response control of building structures

Shaking Table Model Test And Fe Analysis Of A Reinforced Concrete Mega- Frame Structure With Tuned Mass Dampers

Data‐Driven Structural Health Monitoring on Shaking Table Tests of a 3‐Story Steel Building with Sliding Slabs

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

RANDOM SEISMIC RESPONSE ANALYSIS OF ADJACENT BUILDINGS COUPLED WITH NON-LINEAR HYSTERETIC DAMPERS

Semi-Active Control of Randomly Wind-Excited Tall Building Structures Using Mr-Tlcds

Shaking table test and seismic behaviour evaluation of viscous damping wall with amplification mechanism

Shaking Table Attached to Magnetorheological Damper: Simulation and Experiments for Structural Engineering

A Substructure Shaking Table Test for Reproduction of Earthquake Responses of High‐rise Buildings

Shaking table tests for structures with viscous dampers considering SSI effect

Analysis on Energy Dissipation Control for Eccentric Structure

Shaking table test and numerical simulation of the vibration control performance of a tuned mass damper on a transmission tower

Experimental Study of Active Control for MDOF Seismic Structures

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams

Dynamic modelling and control of shear-mode rotational MR damper for mitigating hazard vibration of building structures

Experimental investigations of building structure with a superelastic shape memory alloy friction damper subject to seismic loads

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Seismic control of multi-degrees-of-freedom structures by vertical mass isolation method using MR dampers