Abstract:Earthquakes contain complex components in both the horizontal and vertical directions. However, most vibration control strategies work only in a single direction. The existing multi-dimensional isolation devices usually have complex designs and low damping ratios; hence, the stability of structures that incorporate the devices is currently insufficient. This study designs a novel multi-dimensional isolation and mitigation device based on viscoelastic damping technology (VE-MDIMD). The device consists of a core bearing and several cylindrical dampers, providing vibration control capacity in both the horizontal and vertical directions and a strong uplift resistance. To evaluate the device's performance, a series of dynamic tests are conducted on the cylindrical damper utilized in the device. The results show that the damper's mechanical properties exhibit a pronounced dependence on the frequency and amplitude, and its hysteresis curves become obviously nonlinear with increased deformation. Subsequently, to describe the behavior of the VE-MDIMD, a mechanical model is established which combines the construction of the device and the characteristics of the damper. Considering the limitations of existing models in fully capturing the nonlinear behavior of the damper, a novel multi-scale model is proposed based on the microstructure of viscoelastic material. The experimental verification confirms that the model can accurately capture the frequency and amplitude dependence, as well as the nonlinear hysteresis behavior, of the damper. Finally, the effectiveness of the VE-MDIMD is evaluated through the dynamic analysis of an actual structure. The arrangement of the device in the structure is optimized based on a multi-objective genetic algorithm available in Matlab (R2019b) and OpenSEES (Version 3.0.0). The results demonstrate the device's superiority in controlling both horizontal and vertical vibrations in the superstructure.

Seismic control of multi-degrees-of-freedom structures by vertical mass isolation method using MR dampers

An innovative methodology for hybrid vibration control (MR+TMD) of buildings under seismic excitations

Comprehensive nonlinear seismic performance assessment of MR damper controlled systems using virtual real‐time hybrid simulation

Semi-active seismic control of an 11-DOF building model with TMD+MR damper using type-1 and -2 fuzzy algorithms

Seismic response control of adjacent buildings coupled by semi-active shared TMD

Dynamic modelling and control of shear-mode rotational MR damper for mitigating hazard vibration of building structures

Comprehensive Assessment of the Seismic Performance of an Innovative Hybrid Semiactive and Passive State Control System for a Low-Degree-of-Freedom Structure Using Real-Time Hybrid Simulation

Seismic Response Control of Core Wall Structures Using Tuned Viscous Mass Damper (TVMD) Outriggers

Semi-Active Control of Randomly Wind-Excited Tall Building Structures Using Mr-Tlcds

Semi-active Vibration Control of Soft-Storey Building with Magnetorheological Damper Under Seismic Excitation

Application of Semi-active TMD to Tilted High-Rise Building Structure Subjected to Seismic Loads

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

OPTIMAL CONTROL OF ACCELERATIONS IN A BASE-ISOLATED BUILDING USING SEMI-ACTIVE MR DAMPERS

Seismic control of vertically and horizontally irregular steel high-rise buildings by tuned mass dampers including SSI

Comparative Study of Semi-Active Control Effectiveness of Structures on Soft Soil Using MR Damper: Shaking Table Investigation

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

Seismic control of tall buildings using vertically distributed multiple tuned mass dampers

Comparative Studies of Semiactive Control Strategies for MR Dampers: Pure Simulation and Real-Time Hybrid Tests

Improving the Seismic Response of Tall Buildings: From Diagrid to Megastructures and Mega-Subcontrol Systems

Seismic Vibration Control of Multiple-Degrees-of-Freedom Steel Structures Through Optimal Impact Mass Dampers