Abstract:Two-phase flows are common phenomena in numerous industrial equipment. The complex and changeable phase interface determines the characteristics such as flow pattern evolution and energy-mass transport between the two phases. As a key component of rod bundle fuel assembly in nuclear reactors, the spacer grid plays important roles, including fixing the rod position, promoting mixing, and intensifying heat transfer. This study investigated the axial two-phase flow evolution and interfacial area transport characteristics downstream of the non-mixing vane spacer grid (N-MVSG) inside a tight lattice rod bundle fuel assembly under air-water two-phase flows. A self-developed double-layer wire-mesh sensor (WMS) was adopted to survey 6 positions downstream of the N-MVSG ( Z / D h = 9.15, 14.94, 20.73, 26.52, 32.31, and 61.26), and 42 cases were acquired from bubbly to cap-bubbly and to slug flow. Eventually, void fraction, bubble velocity, interfacial area concentration (IAC), and bubble size distribution (BSD) databases were established. Under the group-1 (G-1) flow, some small bubbles migrate toward the subchannel center, and the void fraction gap-region peak distribution gets weakened. The 1-D void fraction and IAC after the N-MVSG increase first and then gradually recover to its upstream level. Under the two-group flow, the N-MVSG clearly cut group-2 (G-2) bubbles, and the time-averaged void fraction profile downstream of N-MVSG undergoes the evolution of the square distribution, and ring distribution, and then reverts to the upstream core peak distribution. The analysis of BSD results indicates that the G-2 bubbles' break-up is mainly caused by the increment of the flow-field turbulence, rather than the cutting of the N-MVSG. The 1-D void fraction and IAC transport show the total void fraction and IAC increase first and then recover downstream of the N-MVSG. Meanwhile, the G-2 void fraction and IAC reach the maximum before the G-1's due to the coalescence of the G-1 and G-2 bubbles at the N-MVSG's exit. The model evaluation using the IATE without bubble interaction source/sink terms shows that, for most cases, the advection effect and pressure effect dominate the void fraction and IAC evolution. The remarkable bubbles' break-up occurs under the transition cases and the two-group cases with high liquid velocity. In future studies, the additional source/sink term models considering the N-MVSG effect should be developed based on these cases to improve the IATE prediction performance.

Transport Through Single-Hole Baffles in Industry Hydrothermal Autoclaves with Three-Dimensional Flows

Single- and multi-hole baffles—a heat transfer and fluid flow control for hydrothermal growth

Three-dimensional Flow of Solution in an Industry-Size Hydrothermal Autoclave Subjected to Non-Uniform Heating—effects of a Baffle on Flow and Temperature Separation

Flow of Solution in Hydrothermal Autoclaves with Various Aspect Ratios

Determination of Surface Heating Condition for a Desired Thermal Growth Environment in an Industry-Size Hydrothermal Autoclave

Natural Convection Flow Structures and Heat Transfer in a Model Hydrothermal Growth Reactor

A Three-Dimensional Conjugate Model with Realistic Boundary Conditions for Flow and Heat Transfer in an Industry Scale Hydrothermal Autoclave

Determination of Surface Heating Distribution to Establish Targeted Thermal Environments in Industry Hydrothermal Autoclaves

Effects of baffles on separation of aqueous ethanol solution with hollow fibers

Optimization of thermosolutal convection in vertical porous annulus with a circular baffle

On the relative contribution of solid-phase heat transfer in 3D printed baffled logpile catalyst structures

Numerical Study on the Heat Transfer Deterioration and Its Mitigations for Supercritical CO2 Flowing in a Horizontal Miniature Tube

Developing an algorithm to evaluate the tube and baffle choice influences on enhancing the hydrothermal performances of shell and tube heat exchangers

Flow boiling heat transfer enhancement in vertical minichannel heat sink with non-uniform microcavity arrays under electric field

Boiling and Condensation Two-Phase Flow Heat Transfer on Three-Dimensional Macroscale Surfaces with Microscale Structures

Influence of baffles on mixing and heat transfer characteristics in an internally heated rotating drum

Research of Heat Exchanger Structure and Performance with Continuous Helical Shaped Baffles

Effect of Porous Baffles on the Energy Performance of Contact Tanks in Water Treatment

Hydraulic optimization of membrane bioreactor via baffle modification using computational fluid dynamics.

Two-phase flow evolution and interfacial area transport downstream of the non-mixing vane spacer grid in rod bundle channels

Flow and Thermal Mixing Characteristics of a Multi-Jet Bypass Flue with Main Flue Baffles