Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

Determination of Surface Heating Condition for a Desired Thermal Growth Environment in an Industry-Size Hydrothermal Autoclave

Determination of Surface Heating Distribution to Establish Targeted Thermal Environments in Industry Hydrothermal Autoclaves

Three-dimensional Flow of Solution in an Industry-Size Hydrothermal Autoclave Subjected to Non-Uniform Heating—effects of a Baffle on Flow and Temperature Separation

A Three-Dimensional Conjugate Model with Realistic Boundary Conditions for Flow and Heat Transfer in an Industry Scale Hydrothermal Autoclave

Flow of Solution in Hydrothermal Autoclaves with Various Aspect Ratios

Transport Through Single-Hole Baffles in Industry Hydrothermal Autoclaves with Three-Dimensional Flows

Natural Convection Flow Structures and Heat Transfer in a Model Hydrothermal Growth Reactor

Single- and multi-hole baffles—a heat transfer and fluid flow control for hydrothermal growth

Optimization of the Thermal Field of 8-Inch SiC Crystal Growth by PVT Method with “3 Separation Heater Method”

Theoretical analysis of induction heating in high-temperature epitaxial growth system

Hot-zone design and optimization of resistive heater for SiC single crystal growth

A Heat-Balance Method for Autoclave Process of Composite Manufacturing

Thermal Field Design of a Large-Sized SiC Using the Resistance Heating PVT Method Via Simulations

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

A Volume Radiation Heat Transfer Model for Czochralski Crystal Growth Processes

Modelling of Heat Transfer in Single Crystal Growth

Numerical Investigation of Induction Heating and Heat Transfer in A Sic Growth System

Design and Optimization of an Aluminum Nitride Sublimation Growth System

Numerical study of heat transfer during sapphire crystal growth by heat exchanger method

Axisymmetric Lattice Boltzmann Simulation of the Heat-Exchanger Method-Based Sapphire Crystal Growth

Validation of 3D and 2D thermal and electromagnetic models for high-frequency induction heating in crystal growth processes