Abstract:This article presents a numerical model of electromagnetic levitation melting and its experimental validation. Levitation melting uses the phenomenon of magnetic induction to float a melted, usually metallic, conductor in an electromagnetic field. With the appropriate configuration of the coil (the source of the alternating magnetic field), the eddy currents induced in the molten batch interact with the coil magnetic field, which causes the melted metal to float without direct contact with any element of the heating system. Such a contactless process is very beneficial for melting very reactive metals (e.g., titanium) or metals with a high melting point (e.g., tungsten). The main disadvantage of levitation melting is the low efficiency of the process. The goal of the authors is to develop, by means of a numerical simulation and optimization tools, a system for levitation melting with acceptable efficiency. To achieve this, it is necessary to develop a reliable and representative computational model. The proposed model includes an analysis of the electromagnetic field, with innovative modeling of the convective heat transport. Experimental validation of the model was performed using aluminum alloy, due to the lack of the need to use a protective atmosphere and the ease of measurements. The measurements included electrical values, the melted batch positions during levitation, the melting time, and the temperature distribution in its area. The verification showed that the compliance between the computational model and the simulation for the position of the batch was accurate to 2 mm (6.25%), and the consistency of the batch melting time was accurate to 5 s (5.49%). The studies confirmed the good representativeness of the developed numerical model, which makes it a useful tool for the future optimization of the levitation melting system.

Validation of 3D and 2D thermal and electromagnetic models for high-frequency induction heating in crystal growth processes

Controlling Voltage Computation in Electromagnetic Induction Heating

The Validation of the Simulated HIRF Effects in Metallic Cases Using Parallel FDTD Solver on a High Performance Computer

Design of an RF-Heated Bulk AlN Growth Reactor: Induction Heating and Heat Transfer Modeling

A Volume Radiation Heat Transfer Model for Czochralski Crystal Growth Processes

Simulation of the Inductor Structure to Improve FZ Thermal Fields

Numerical Analysis of 3D Eddy Current Fields in a Cold Crucible

Numerical simulations of strengthen induction heating with response surface methodology

Modeling And Simulation Of Induction Heating With Magnetic Flux Concentrator

Modeling Of High-Frequency Induction Heating Surface Cladding Process: Numerical Simulation, Experimental Measurement And Validation

Numerical Investigation of Induction Heating and Heat Transfer in A Sic Growth System

Numerical Computation of Coupled Electromagnetic-Thermal Field in an Induction Edge Heater for the Hot Strip Mill

Numerical simulation of temperature field during high frequency induction heating and its application on brazing of T type copper pipe

Indirect Temperature Measurement in High Frequency Heating Systems

A Simulation Model for the Inductor of Electromagnetic Levitation Melting and Its Validation

Full 3D thermal-hydraulic and electric modelling of quench propagation in HTS conductors

Numerical Simulation of Radio Frequency Induction Plasma Spray Processing

Multiphysics modeling and experimental validation of heat and mass transfer for the vacuum induction melting process

Three-dimensional modelling of processes in Electron Cyclotron Resonance Ion Source

Exploration of the Relationship between the Electromagnetic Field and the Hydrodynamic Phenomenon in a Channel Type Induction Heating Tundish Using a Validated Model

The Establishment Of Coupled Electromagnetic-Thermal Analytical Model Of Induction Heating System With Magnetic Flux Concentrator And The Study On The Effect Of Magnetic Permeability To The Modeling