Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

A low-temperature partial-oxidation-methanol micro reformer with high fuel conversion rate and hydrogen production yield

A LOW-TEMPERATURE POM MICRO METHANOL REFORMER WITH HIGH FUEL CONVERSION RATE AND HYDROGEN PRODUCTION YIELD

A High Efficient POM Micro-Methanol Reformer

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

LOW TEMPERATURE POM MICRO-REFORMER WITH SILICON NANO-WIRE SUPPORTED NANO CATALYSTS

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

A High-Yield and Ultra-Low-temperature Methanol Reformer Integratable with Phosphoric Acid Fuel Cell (PAFC)

Real-time Monitoring of a Micro Reformer Integrated with a Microchannel Heat Exchanger by Infrared Thermography and High-Speed Flow Images

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Investigation of a methanol processing system comprising of a steam reformer and two preferential oxidation reactors for fuel cells

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Experimental Study of the Design and Performance Optimisation of a Self-Heating Methanol On-Board Reforming Reactor for Hydrogen Production

Standalone ethanol micro-reformer integrated on silicon technology for onboard production of hydrogen-rich gas

Study on the Laws of Methanol Reforming Coupled with Flow, Heat and Mass Transfer Processes with Variable Catalyst Distribution in Microchannels

Performance of a Microchannel Reactor for Reforming of Methanol

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

High Yields Of Hydrogen Production From Methanol Steam Reforming With A Cross-U Type Reactor