Abstract:Using renewable energy, especially solar energy, is essential to achieve a low-carbon society. PCMs suffer from low thermal conductivity, which hinders the efficiency of phase change thermal storage systems. Heat pipes exhibit vastly superior thermal conductivity, making them a promising candidate for enhancing PCM-based systems. To solve the contradiction between building insulation and importing solar energy into buildings in winter, this study proposes a new building heating ceiling system consisting of a flat-plate heat pipe (FHP) coordinated with a phase change material (PCM), and establishes a platform for a heat stockpiling device integrating the FHP and PCM. This research investigates the impact of heating power and bending angle on the heat transfer efficiency of the heat pipe and phase change heat storage system. The experimental findings demonstrate a direct relationship between increasing heating power and the enhancement of the FHP's heat transfer efficiency. When the FHP is bent at a 5° angle and heating power is increased from 20 W to 80 W, to store heat energy into the PCM cavities, the effective thermal conductivity rises significantly, escalating from 7.26 × 10 4 W/(m·°C) to 15.1 × 10 4 W/(m·°C), marking a remarkable 108 % rise. Moreover, although increasing the bending angle leads to heightened effective thermal conductivity of the FHP under constant heat input, and the heat transfer in PCM cavities will be weakened within a bending angle of 15°, experimental results demonstrate that the melting time of PCM still decreases with the increase of bending angle; the heat transfer inertia of phase change materials is dominant.

Effect of thermal conductivities of shape stabilized PCM on under-floor heating system

Preparation, Thermal Performance, and Application of Shape-stabilized PCM in Energy Efficient Buildings

Research on the thermal performance of the room with integrated water tube floor heating system using shape-stabilized phase change materials for energy storage

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

Model and simulation on thermal performance of shape-stabilized phase change material floor

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental Study of Under-Floor Electric Heating System with Shape-Stabilized PCM Plates

Effect of Anisotropic Thermal Conductivity on Thermal Control Performance of Form-Stable Phase Change Material

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Design and analysis of phase change material based floor heating system for thermal energy storage

Development of diatomite-based shape-stabilized composite phase change material for use in floor radiant heating

Improvement in thermal properties of PCM/Expanded vermiculite/expanded graphite shape stabilized composite PCM for building energy applications

EXPERIMENTAL STUDY ON THE RADIANT FLOOR HEATING SYSTEM UTILIZING FORM-STABLE PCM AS THE THERMAL MASS

Thermal performance and optimization of a casing pipe solar energy storage floor with phase change material

Experimental study on heat transfer and storage of a heating system coupled with solar flat heat pipe and phase change material unit

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Study of an Electrical Heating System with Ductless Air Supply and Shape-Stabilized PCM for Thermal Storage

Analysis of the Thermal Storage Performance of a Radiant Floor Heating System with a PCM

Thermal performance of phase change material energy storage floor for active solar water-heating system

An Assessment of Mixed Type PCM-gypsum and Shape-Stabilized PCM Plates in a Building for Passive Solar Heating