Experimental study on heat transfer and storage of a heating system coupled with solar flat heat pipe and phase change material unit

Ziyun Wang,Jia Zhu,Moxin Wang,Qinglong Gao

DOI: https://doi.org/10.1016/j.est.2023.108971

IF: 9.4

2023-09-21

Journal of Energy Storage

Abstract:Using renewable energy, especially solar energy, is essential to achieve a low-carbon society. PCMs suffer from low thermal conductivity, which hinders the efficiency of phase change thermal storage systems. Heat pipes exhibit vastly superior thermal conductivity, making them a promising candidate for enhancing PCM-based systems. To solve the contradiction between building insulation and importing solar energy into buildings in winter, this study proposes a new building heating ceiling system consisting of a flat-plate heat pipe (FHP) coordinated with a phase change material (PCM), and establishes a platform for a heat stockpiling device integrating the FHP and PCM. This research investigates the impact of heating power and bending angle on the heat transfer efficiency of the heat pipe and phase change heat storage system. The experimental findings demonstrate a direct relationship between increasing heating power and the enhancement of the FHP's heat transfer efficiency. When the FHP is bent at a 5° angle and heating power is increased from 20 W to 80 W, to store heat energy into the PCM cavities, the effective thermal conductivity rises significantly, escalating from 7.26 × 10 4 W/(m·°C) to 15.1 × 10 4 W/(m·°C), marking a remarkable 108 % rise. Moreover, although increasing the bending angle leads to heightened effective thermal conductivity of the FHP under constant heat input, and the heat transfer in PCM cavities will be weakened within a bending angle of 15°, experimental results demonstrate that the melting time of PCM still decreases with the increase of bending angle; the heat transfer inertia of phase change materials is dominant.

energy & fuels