Abstract:Building Services Engineering Research and Technology, Ahead of Print. Phase change radiant panels (PCRPs) with thermal storage can enhance the heat capacity of buildings, and reduce building energy consumption. In this paper, a composite phase change material (CPCM) was prepared by paraffin wax-lauric acid/expanded graphite (PW-LA/EG) and applied to radiant panels. This CPCM exhibits a broad temperature range for phase change (10°C - 40°C), with EG at the optimal mass fraction of 14% and PW-LA at the optimal ratio of 1:1. It has a moderate latent heat capacity, a thermal conductivity of 1.692 W/mK, and excellent thermal stability. Furthermore, the simulations were performed in this paper, and the year-round comfort, thermal storage/release characteristics, and the influencing factors of PCRPs were evaluated by TRNSYS software. The results show that the PCRP can enhance indoor comfort throughout the year and exhibit excellent thermal storage and release properties. The analysis of influencing factors indicates that the thickness of the PCM has a small impact on the PCRP. It is recommended that a radiant panel coverage rate of at least 70% and a water supply time of 10 h in summer and 8 h in winter. These optimized parameter values can offer valuable guidance for the design and practical application of PCRPs.Practical applicationPhase change materials have been widely studied as materials used for thermal energy storage. The radiant panel with phase change materials can enhance the heat capacity of buildings, and reduce building energy consumption. This paper proposes a phase change radiant panel that can be used to solve the problem of year-round energy storage of radiant panels in hot summer and cold winter areas. Furthermore, this paper uses TRNSYS software to study the performance of the phase change radiant panels and offers valuable guidance for the design and practical application of PCM radiant panels.

Enhancing heating efficiency in electric radiant flooring systems with low-cost shape-stabilized paraffin wax composites: An experimental study

Design and analysis of phase change material based floor heating system for thermal energy storage

Experimental analysis of a radiant floor system incorporating phase change materials: Thermal performance and energy efficiency

Preparation and Application of Paraffin/Expanded Graphite-Based Phase Change Material Floor for Solar-Heat Pump Combined Radiant Heating Systems

Enhancing Building Energy Efficiency with Innovative Paraffin-Based Phase Change Materials

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Development of diatomite-based shape-stabilized composite phase change material for use in floor radiant heating

Preparation, Thermal Performance, and Application of Shape-stabilized PCM in Energy Efficient Buildings

Analysis of the Thermal Storage Performance of a Radiant Floor Heating System with a PCM

Study on thermal performance of a PCM enhanced hydronic radiant floor heating system

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Experimental Study on Paraffin Wax and Soya Wax Supported by High-Density Polyethylene and Loaded with Nano-Additives for Thermal Energy Storage

Thermal and mechanical performance assessment of composite (CPCM) for energy storage

Investigations on paraffin wax/CQD composite phase change material - Improved latent heat and thermal stability

Experimental study on preparation and thermal storage properties of expanded graphite/paraffin wax as a shape-stabilized phase change material

Preparation and performance study of a novel radiant panel for thermal and cooling storage with phase change materials

Market-orientated solutions to increase thermal conductivity in latent thermal energy storage systems

Assessment of low-cost organic phase change materials for improving infrastructure thermal performance

A review of radiant heating and cooling systems incorporating phase change materials

Effect of thermal conductivities of shape stabilized PCM on under-floor heating system

Thermal comfort and energy saving of novel heat-storage coatings with microencapsulated PCM and their application