Abstract:An innovative deposition system has been developed to construct complex material thin films from single-element precursors by chemical beam vapor deposition (CBVD). It relies on well distributed punctual sources that emit individually controlled precursor beams toward the substrate under high vacuum conditions combined with well designed cryo-panel surfaces that avoid secondary precursor sources. In this configuration the impinging flows of all precursors can be calculated at any substrate point considering the controlled angular distribution of the emitted beams and the ballistic trajectory of the molecules. The flow simulation is described in details. The major advantage of the deposition system is its ability to switch between several possible controlled combinatorial configurations, in which the substrate is exposed to a wide range of flow compositions from the different precursors, and a uniform configuration, in which the substrate is exposed to a homogeneous flow, even on large substrates, with high precursor use efficiency. Agreement between calculations and depositions carried out in various system configurations and for single, binary, or ternary oxides in mass transfer limited regime confirms that the distribution of incoming precursors on the substrate follows the theoretical models. Additionally, for some selected precursors and in some selected conditions, almost 100% of the precursor impinging on the substrate is incorporated to the deposit. The results of this work confirm the potentialities of CBVD both as a research tool to investigate efficiently deposition processes and as a fabrication tool to deposit on large surfaces.

Model for the Vaporization of Mixed Organometallic Compounds in the Metalorganic Chemical-Vapor-Deposition of High-Temperature Superconducting Films

Vapor-Phase Molecular Doping in Covalent Organosiloxane Network Thin Films Via a Lewis Acid-Base Interaction for Enhanced Mechanical Properties

Vapor-phase methods for synthesizing metal-organic framework thin films

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Simulation-Assisted Design of Metal Organic Chemical Vapor Deposition Reactor

Vapor-induced marangoni coating for organic functional films

Geometry of Chemical Beam Vapor Deposition System for Efficient Combinatorial Investigations of Thin Oxide Films: Deposited Film Properties versus Precursor Flow Simulations

Modeling Analysis of the Mocvd Growth of Zno Film

Competitive Adsorption and Two-Site Occupation Effects in Metal-Organic Chemical Vapor Deposition of Zno

Numerical and Experimental Comparative Study of Metal-Organic Chemical Vapor Deposition of ZnO

Simulation of the Mocvd Reactor for Zno Growth

Molecular kinetic aspects of vaporization of volatile coordination compounds with organic ligands

Isotropic and Anisotropic Growth Models for the Sublimation Vapour Transport Process

Modeling for Calculation of Vanadium Oxide Film Composition in Reactive-Sputtering Process

Modeling of Gas Phase and Surface Reactions in an Aluminum Nitride Growth System

Modeling of Nonequilibrium Surface Melting and Resolidification for Pure Metals and Binary Alloys

Kinetics and transport model of GexSi1-x chemical vapor epitaxy

Multi-model Simulation of 300 Mm Silicon-Nitride Thin-Film Deposition by PECVD and Experimental Verification

Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing

Mass Transport Of Beta-Diketonate Precursors For Mocvd Of Yba2cu3o7-Delta High T-C Superconducting Thin Films

Thermogravimetric study of metal–organic precursors and their suitability for hybrid molecular beam epitaxy