Abstract:TiO2-doped HfO2 gate dielectric thin films have been deposited on Si(100) substrates by RF sputtering. The component, morphology, structure, optical and interfacial properties of Hf-1 xTixO2 films related to TiO2 concentration are systematically investigated by atomic force microscope (AFM), X-ray diffraction (XRD), spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), and Fourier transformation infrared (FTIR). By employing Cauchy-Urbach model, the optical constants, such as refractive index (n), extinction coefficient (k), absorption coefficient (alpha), and optical band gap (E-g) have been determined precisely. Measurements from XRD have confirmed that TiO2 incorporating into HfO2 films leads to the increase of the crystallization temperature of HfO2 films with increasing the TiO2 concentration. SE analyses have indicated that reduction in band gap and refractive index has been observed with increasing the TiO2 component in Hf-1 xTixO2 films. The increase in Urbach parameter E-U with the increase of TiO2 concentration also suggests the rise in disorder for Hf-1 xTixO2 films. FTIR measurements for Hf-1 xTixO2/Si gate stack indicate the existence of the interfacial layer regardless of the TiO2 concentration. For the 9% TiO2-doped HfO2 samples, the shift in FTIR characteristic peak suggests the formation of the silicate layer, which leads to the suppressed interfacial layer growth during deposition. As a result, it can be conclude that the TiO2 component in Hf-1 xTixO2 films should be controlled precisely to guarantee interfacial properties of Hf-1 xTixO2/Si gate stacks. (C) 2014 Elsevier B.V. All rights reserved.

Modeling the Reactive Sputter Deposition of Ti-doped VO X Thin Films

Modeling for Calculation of Vanadium Oxide Film Composition in Reactive-Sputtering Process

Modeling and Experiments of N-Doped Vanadium Oxide Prepared by A Reactive Sputtering Process

Modeling for V—O 2 Reactive Sputtering Process Using a Pulsed Power Supply

Analysis Of Titanium And Vanadium Oxide Thin Film By Method Of Reactive Co-Sputtering

Modelling and Optimization for Deposition of SiO X N Y Films by Radio-Frequency Reactive Sputtering

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Target Voltage Behaviour of a Vanadium-Oxide Thin Film During Reactive Magnetron Sputtering

Predicting Thin Film Stoichiometry in V-O-2 Reactive Sputtering

Influence of A Revolutionary Substrate on Hysteresis Effect in Reactive Sputtering Deposition of Vanadium Oxide

Reactive Sputter Deposition of Nicrxoy Films Using Nicr Target

Effects of Duty Cycle and Oxygen Flow Rate on the Formation and Properties of Vanadium Oxide Films Deposited by Pulsed Reactive Sputtering

Effects of Deposition Parameters on the Properties of VO2 Thin Films

Study on the Electrical and Optical Properties of Vanadium Doped TiN Thin Films Prepared by Atmospheric Pressure Chemical Vapor

Reactive pulsed DC magnetron sputtering deposition of vanadium oxide thin films: Role of pulse frequency on the film growth and properties

Preparation and Characteristics of Vanadium Oxide Thin Films by Controlling the Sputtering Voltage

Investigations of Electronic Properties of TiO_x Thin Films by DC Reactive Magnetron Sputtering

High-resolution Electron Energy Loss Spectroscopy Study of VO_x/TiO_2(110) Model Catalysts

Thermo-reactive deposition processed vanadium carbide coating: Growth kinetics model and diffusion mechanism

Influences of Sputtering Conditions on Preparation of VOx Thin Film and Its Ohmic Contact to Metal Electrode

Characterization of NiCrOx Thin Films Deposited by Reactive Sputtering at Different O2 Flow Rate