Microstructure and oxidation mechanism of ZrB2-SiC ceramic coating on C/C composite material
WANG Xin-shaung,CHEN Zhao-ke,XIONG Xiang,ZHANG Tian-zhu,SUN Wei,WANG Ya-lei
DOI: https://doi.org/10.19476/j.ysxb.1004.0609.2017.08.16
2017-01-01
The Chinese Journal of Nonferrous Metals
Abstract:To improve the anti-oxidation performance of C/C composites under high temperature and oxygen enriched environment, ZrB2-SiC based ceramic coatings with Si3N4, MoSi2 and TaC addition were prepared by two-step slurry painting+chemical vapor deposition (CVD). Phase composition and microstructure of the as-prepared coating were investigated by using X-ray diffractometry and scan electron microscopy, and the isothermal anti-oxidation mechanism at 900℃ and 1500℃ were also analyzed and discussed. The conclusions are as follows, the thickness of the as-prepared ZrB2-SiC based composite ceramic coating is about 200μm. The densification and the anti-oxidation properties of the coating can be improved by the addition of Si3N4 and MoSi2, effectively. While the anti-oxidation properties of the coating can not be improved by the addition of TaCeffectively at 900℃. At 900℃, the oxidation process of ZrB2-SiC ceramic coating was mainly controlled by the diffusion of oxygen in pore and other defects in the coating. The anti-oxidation property of coating can be improved by the addition by affecting the density of coating. In the oxidation process of 1500℃, the oxidation resistance of the coating decreases. The introduction of the compact structure of CVD SiC sealing layer can improve the oxidation resistance significantly. At 1500℃, in oxidation process, SiO2 glassy oxide film with ZrO2 and ZrSiO4 on the coating is generated, this can provide effective oxidation protection for the substrate.