Abstract:Fe50Mn30Co10Cr10 dual-phase high entropy alloy (DP-HEA) has good application prospects in the nuclear and automotive industries due to its strength-ductility synergistic effect. The initial volume fractions of FCC twins and HCP martensites in Fe50Mn30Co10Cr10 HEA affect the relative contribution of transformation-induced plasticity and twinning-induced plasticity to the alloy's strength and ductility under loading conditions. Understanding the relationship between FCC twins and martensites is crucial during the friction stir process (FSP). In this study, the microstructure of Fe50Mn30Co10Cr10 HEA as FSP condition was studied. The HCP phase in the base metal almost completely transformed into the FCC phase during FSP. Both FCC twin and HCP martensite transformations serve to alleviate strain in the FCC matrix. The initiation of FCC twin and martensite formation depends on critical stress levels at different temperatures. Higher strain and coarser grains promote more martensite formation, while finer grains and lower strain impede it, causing FCC twins to occur before HCP martensites during the cooling process of materials in the processed zone. These findings offer insights into controlling the volume fractions of twins and martensites in FSPed DP-HEA, thereby potentially enhancing the mechanical properties of DP-HEA.

Concentration Dependence of FCC to FCT Martensitic Transformation in Fe–Pd Alloys

Large Elastic-Like Strain in an Fe-31.2Pd (at.%) Alloy Exhibiting a Second-Order-Like FCC-FCT Martensitic Transformation

Superelasticity of Single Crystalline Fe-30.8 at.%Pd Alloy

Shape memory effect associated with successive FCC-FCT-BCT martensitic transformation in single-crystalline Fe-Pd alloy

Elastic Limit of Fe–Pd Alloys Exhibiting Lattice Softening

Intersection Magnetization and Temperature Revealed by FCC-FCT Phase Transformation in the FePd Binary Alloy System

Dynamic Mechanical Analysis of Weak First-Order Martensitic Transformation in an Iron–palladium Alloy

fcc Antiferromagnetism and martensitic transformation m Fe-Mn-Si based alloys

Composition and Structure Dependence of Specific Heat of Disordered Iron-Palladium Alloys

High damping capacity of single crystalline iron-palladium alloy exhibiting a weak first-order martensitic transformation

Effect of Pd Addition on Martensitic Transformation and Mechanical Properties of Ni_(56.5)Fe_(17)Ga_(26.5) Ferromagnetic Shape Memory Alloy

The Effect of Fe on the Martensitic Transformation of Taru High-Temperature Shape Memory Alloys: A First-Principles Study

Critical Point of Martensitic Transformation under Stress in an Fe-31.2Pd (at.%) Shape Memory Alloy

Effects of Pd Content on Microstructures, Martensitic Transformation of Ti50.5Ni38-xCu11.5Pdx (x = 3, 4, 4.5, 5.5) Alloys

FCC Twins and Martensites Responses of Metastable Dual-Phase High Entropy Alloy to Friction Stir Processing

Crystallography of FCC(γ)→HCP(ϵ) martensitic transformation in Fe-Mn-Si based alloys

Large elastic strain and elastocaloric effect caused by lattice softening in an iron-palladium alloy

Effect of Thermomechanical Processing on the Microstructure and Properties of a Cu-Fe-P Alloy

Fabrication and Magnetic Properties of Fe–Pd Nanowire Arrays

Optimization of the magnetic properties of FePd alloys by severe plastic deformation

Nonequilibrium solidification of Fe-P alloys