Abstract:Stress and couple stress distributions are determined analytically for a coated fiber in an infinite micropolar matrix, loaded remotely by classical symmetric stresses. The determined stresses are then compared with those predicted by Cauchy theory, a size dependence is predicted in the framework of micropolar theory, and when the fiber’s diameter is much larger than the characteristic length of the matrix, the classical prediction can be recovered. The exact average stress in a fiber for a fiber-matrix system (without interphase) is also compared with that approximately derived by the average equivalent inclusion method (AEIM), based on the micropolar Eshelby tensor given by Cheng and He [Int. J. Eng. Sci. 35 (7) (1997) 659], the results show that the approximate AEIM method can give an accurate prediction for the size dependence of the average stress in a fiber. A micro–macro transition method is also proposed to determine effective in plane moduli of a heterogeneous micropolar material, the effective shear and in plane bulk moduli of a micropolar composite with coated fibers are derived analytically by extending Mori–Tanaka’s method to a micropolar composite, and the effective shear and in plane bulk moduli for a two-phase fiber composite (without interphase) are also obtained as a special case. The results show that the effective in plane bulk modulus is identical to that obtained by Cauchy theory, however the effective shear modulus depends on fiber’s diameter, it increases with decreasing fiber’s diameter at the same fiber volume fraction, and the classical prediction is recovered when the fiber’s diameter becomes large compared to the matrix characteristic length.

Effective Elastic Moduli of Fiber-Reinforced Composites with Interfacial Displacement and Stress Jumps

Size-dependent Effective Elastic Moduli of Particulate Composites with Interfacial Displacement and Traction Discontinuities

A COMPUTATIONAL APPROACH FOR EVALUATING THE EFFECTIVE ELASTIC MODULI OF NON-SPHERICAL PARTICLE REINFORCED COMPOSITES WITH INTERFACIAL DISPLACEMENT AND TRACTION JUMPS

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

Implementation of a Physics‐based General Elastic Imperfect Interface Model in the XFEM and LSM Context

Closed-Form Interacting Solutions for Overall Elastic Moduli of Composite Materials with Multi-Phase Inclusions, Holes and Microcracks

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Shear-lag model for discontinuous fiber-reinforced composites with a membrane-type imperfect interface

Modeling of Interphases in Fiber-Reinforced Composites under Transverse Loading Using the Boundary Element Method

Frequency Domain Homogenization of Effective and Localized Viscoelastic Response of Unidirectional Composites with Imperfect Interfaces

Effective Moduli of Particle-Filled Composite with Inhomogeneous Interphase: Part II – Mapping Method and Evaluation

A Micromechanical Model for Interpenetrating Multiphase Composites

Micromechanical analysis of off-axis loading of fiber reinforced composites with imperfect interface bonding

Effective Elastic Properties of Transversely Isotropic Matrix Based Composites

Numerical Evaluation of the Effective Conductivities of Composites with Interfacial Weak and Strong Discontinuities

Effective in Plane Moduli of Composites with a Micropolar Matrix and Coated Fibers

Micromechanical approach to the elastoplastic behavior of a fiber reinforced composite

Homogenized Finite Element Analysis on Effective Elastoplastic Mechanical Behaviors of Composite with Imperfect Interfaces

Effect of Fiber Waviness and Cluster on Effective Elastic Properties of Fiber-Reinforced Composites

Comparison Of Two Computational Microstructure Models For Predicting Effective Transverse Elastic Properties Of Unidirectional Fiber Reinforced Composites

Micromechanical Properties of Unidirectional Composites Filled with Single and Clustered Shaped Fibers