Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Comparison Of Two Computational Microstructure Models For Predicting Effective Transverse Elastic Properties Of Unidirectional Fiber Reinforced Composites

Influence of Fiber Distribution and Interfacial Strength on Transverse Compressive Strength of Unidirectional Composites

Effect of the Orientation of Hexagonal Fibers on the Effective Elastic Properties of Unidirectional Composites

Micromechanical Properties of Unidirectional Composites Filled with Single and Clustered Shaped Fibers

Elastic and Strength Analysis of Hybrid 3D Woven Orthogonal Composites: Numerical and Analytical Modelling

Transverse Strength Prediction of Composite Materials Via Micromechanics Model

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions

A New Model for the Transverse Modulus of Unidirectional Fiber Composites

Computational Thermal Model of Unidirectional Composites with Random Fiber Array

Effective Elastic Properties of Transversely Isotropic Matrix Based Composites

Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study

Analytical Study of Morphologies for Ultra High Elastic Stiffness of Composites with Aligned Cylindrical Fibers

Numerical Investigation of Microstructure Effect on Mechanical Properties of Bi-Continuous and Particulate Reinforced Composite Materials

Predicting the Elastoplastic Response of Fiber-Reinforced Metal Matrix Composites

On micromechanics approach to stiffness and strength of unidirectional composites

The Effect of Micromechanics Models on Mechanical Property Predictions for Short Fiber Composites

Comparison of Micro-Mechanical Model for Elastic Constants Analysis of Stitched Composites

Micromechanical Analyses of Unidirectional (UD) Discontinuous Flax Fiber Reinforced Composites

Micromechanical modeling of discontinuous long fiber reinforced composites

Numerical Investigations of Microscopic Characteristic Influences on the Mechanical Properties of Polymer‐matrix Composites

Evaluation of Three Unit Cell Models in Predicting the Mechanical Behaviour of 3D Four-Directional Braided Composites