Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

The Effect of Micromechanics Models on Mechanical Property Predictions for Short Fiber Composites

On micromechanics approach to stiffness and strength of unidirectional composites

Transverse Strength Prediction of Composite Materials Via Micromechanics Model

Investigation of the Three-Dimensional Micromechanical Behavior of Woven-Fabric Composites

On Predicting the Effective Elastic Properties of Polymer Nanocomposites by Novel Numerical Implementation of Asymptotic Homogenization Method

Micromechanical Predictions on Elastic Moduli of a Short Fiber Composite with Arbitrary Geometric Combination

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

Micromechanical Modeling of Plain Woven Polymer Composites Via 3D Finite‐volume Homogenization

Micromechanical Prediction of Elastic-Plastic Behavior of a Short Fiber or Particle Reinforced Composite

Modeling and Characterizations of Mechanical Behaviors of Short Carbon Fiber and Short Glass Fiber Reinforced Polyetherimide Composites

Numerical Evaluation on Mechanical Properties of Short-Fiber-reinforced Metal Matrix Composites: Two-step Mean-Field Homogenization Procedure

Micromechanical Analyses of Unidirectional (UD) Discontinuous Flax Fiber Reinforced Composites

Comparison Of Two Computational Microstructure Models For Predicting Effective Transverse Elastic Properties Of Unidirectional Fiber Reinforced Composites

Multiscale Thermomechanical Modeling of Short Fiber-Reinforced Composites

Modeling the effective elastic and viscoelastic properties of randomly distributed short fiber reinforced composites

An asymptotic homogenization model for evaluating the mechanical properties of random fiber reinforced composites with high volume fraction

A New Model for the Transverse Modulus of Unidirectional Fiber Composites

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions

Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect