Abstract:Active layer thickness variation in highly-doped amorphous indium-gallium-zinc oxide thin film transistors with molybdenum-chromium contacts is studied to reveal parametric dependencies under both channel length and gate-contact overlap length scaling. Devices with thickness variations from 5 nm to 30 nm, channel length variation from 3 µm to 100 µm and gate-contact overlap length variation from 1 µm to 10 µm were fabricated, characterized and analyzed. Analysis from a field effect transistor perspective show typical thickness variation trends where threshold voltage shifts positively, subthreshold slope improves and Ion/Ioff ratio increases as the active layer thickness is scaled down. Peculiar observations like extremely low saturation voltage, insensitivity towards channel length variations, two different slopes in the subthreshold region and peaks in the transconductance characteristics can be explained only by invoking the principle of Schottky transistor operation. Thinner devices exhibit high field Schottky operation with barrier lowering which causes monotonously increasing transconductance, while thicker devices show low field behavior with no barrier lowering signified by peaks with saturated behavior of transconductance. Channel length modulates this dependence of transconductance on thickness. Sensitivity towards gate-contact overlap length scaling increases with thickness. Devices with active layer thickness of 5 nm can withstand overlap length scaling up to 5 µm without transconductance degradation, while devices of 10 nm thickness can withstand overlap length scaling only upto 10 µm. Devices of 30 nm thickness show contact limited operation even at 10 µm overlap length. Conventional FET operating principles cannot explain these observations and the phenomenon of Schottky contact transistor operation has been invoked. The results point towards a thin borderline in low dimensional transistors, differentiating a FET from Schottky contact transistors, through a field dependent barrier lowering mechanism, which is modulated by active layer thickness, channel length and gate contact overlap length.

Short Channel Effects in Regioregular Poly(Thiophene) Thin Film Transistors

A comprehensive study of short channel effects in organic field-effect transistors

Performance of Thin-Film Transistors with Ultrathin Ni-MILC Polycrystalline Silicon Channel Layers

Effect of source–drain contact and channel length on the performance of vertical thin-film transistors

Intrinsic hole mobility and trapping in a regio-regular poly(thiophene)

Effects of Laser Activation on Device Behaviour for Poly-Si Thin-Film Transistors with Different Channel Lengths

Long‐Channel Effects in Randomly Oriented Carbon Nanotube Thin Film Transistors

Highly-Doped Region Optimization for Reduced Hot-Carrier Effects in Dual-Gate Low Temperature Polysilicon TFTs

Effect of Channel Shape on Performance of Printed Indium Gallium Zinc Oxide Thin-Film Transistors

Understanding Thickness-Dependent Electrical Characteristics in Conjugated Polymer Transistors with Top-Gate Staggered Structure

Abnormal ${C}$ – ${V}$ Hump Effect Induced by Hot Carriers in Gate Length-Dependent P-Type LTPS TFTs

Effect of active layer thickness variation on scaling response in a-IGZO thin film transistors under Schottky limited operation

Channel thickness effect on the performance of amorphous SiZnSnO semiconductor thin-film transistor with metal capping structure

Study on the Performance of Organic Thin Film Transistors with Different Ratio of Channel Width to Length

Temperature-dependent contact resistances in high-quality polymer field-effect transistors

Channel-Shortening Effect Suppression of a High-Mobility Self-Aligned Oxide TFT Using Trench Structure

Abnormal Back Channel Leakage under Large Drain Voltage in Short Channel Organic Thin-Film Transistors

Overestimation of Operational Stability in Polymer-Based Organic Field-Effect Transistors Caused by Contact Resistance

Channel Length-Dependent Parasitic Bipolar Transistor Effect in Poly-Si TFTs Considering Traps at Grain Boundary

Enhanced Performance of Solution-Processed Regioregular Poly(3-Hexylthiophene) Thin-Film Transistors Using Planar Bottom-Contact Architecture

Reversible and irreversible trapping at room temperature in poly(thiophene) thin-film transistors