Abstract:Factors such as the memory effect of viscoelastic materials and the influence of microcantilever deflection still pose challenges in the mechanical modeling, mathematical solution, and material parameter identification for AFM indentation-relaxation experiments to characterize the viscoelastic properties of cells. This paper aims to provide a rational mechanical model for interpreting the detection signals in AFM indentation-relaxation experiments. Considering the contribution of microcantilever deflection under the Euler beam assumption to the viscoelastic indentation force, the Lee-Radok's model was updated. Combining a piecewise integration method and a time-domain differential method, we derived the implicit/explicit governing equations of the probe-cell viscoelastic indentation forces under ramp-hold protocol. After building the finite element (FE) model, we examined the effect of microcantilever deflection on the acquired data in FE simulation results and the updated model predictions, and compared our updated model with relevant experiments. Then, we proposed a new two-stage (TS) approach for parameter extraction and compared the differences between this new approach and the classic single-stage (SS) approach, thus the strategy for suppressing parameter extraction error was presented. The results validate that the transient modulus extracting by the classical SS approach is essentially an equivalent transient modulus dependent on the ramp loading history, which incurs a divergence in identification of cellular viscoelastic parameter; whereas the new TS approach is valid at a broader range of loading conditions due to explicitly reflecting the dependence of viscoelastic material parameters on ramp loading history. These conclusions provide a theoretical foundation and reference for the advancement of AFM-based detection techniques for cellular mechanical properties.

Contact Resonance Force Microscopy For Nanomechanical Characterization: Accuracy And Sensitivity

Improved Sensitivity for Subsurface Imaging by Contact Resonance Atomic Force Microscopy Using Fano Peaks

Note: Nanomechanical characterization of soft materials using a micro-machined nanoforce transducer with an FIB-made pyramidal tip

Mems/Nems Mechanical Characterization on Different Thin - Film Materials by Scanning along Micro-Machined Cantilevers

Photothermally Excited Contact Resonance Imaging in Air and Water

Speculative Attacks and Defenses as Wars of Attrition: Theory and an Example*

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Quantification of surface displacements and electromechanical phenomena via dynamic atomic force microscopy

Measuring stiffness and residual stress of thin films by contact resonance atomic force microscopy

Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system

Validation of contact mechanics models for Atomic Force Microscopy via Finite Elements Analysis

Sensitivity in nanomechanical pedestal MEMS cantilever

Plate geometries for contact resonance atomic force microscopy: Modeling, optimization, and verification

Method for measuring micro-cantilever force constant

Quantitative Visualization of the Nanomechanical Young’s Modulus of Soft Materials by Atomic Force Microscopy

Nanoscale effects in the characterization of viscoelastic materials with atomic force microscopy: coupling of a quasi-three-dimensional standard linear solid model with in-plane surface interactions

Multiparametric characterization of heterogeneous soft materials using contact point detection-based atomic force microscopy

An updated model including the deflection history of microcantilever for characterizing cellular viscoelastic properties by AFM indentation-relaxation test

Nanomechanical Characterisation of MEMS Thin Film Materials

A novel contact model for AFM indentation experiments on soft spherical cell-like particles.