Abstract:In the past decades, health evaluation and damage detection of large scale structures, especial large bridges, has attracted more and more attention. Among the damage detecting methods based on structural dynamic characteristic test, the strain mode (or the curvature mode) is proved to be much more sensitive than the traditional indexes (such as the natural frequencies and the displacement modes), and is regarded as one of the promising indexes to detect damage. However, up to now the strain mode method is not being widely used on the actual large scale structures yet. The method and instrumentation of dynamic strain measurement on field play as the role of bottle-neck. The method of estimating dynamic strain by two points displacement measurement, proposed in this paper, could be a simple and convenient way to obtain the dynamic strain and even to obtain the strain mode. The key of this method is the precise measurement of the large scale structures' vibration displacement with micron or sub-micron amplitude. Based on a kind of high sensitive low-frequency vibration transducer (DP transducer), the emphasis of this paper was put on the error analysis of this approach while used on field. The errors, including the transducer's placement error, the transducer's compatibility error and the transducer's frequency domain characteristic error, were analyzed. These errors' effects to dynamic strain measurement precision and the processing means of these errors were investigated too. The error analysis and processing illuminated that there is no very rigorous requirement to the placement of the transducers on structures, and the optimization of the transducer's characteristic is the sticking point of improving the testing precision of dynamic strain. Moreover, the appropriate signal processing could also reduce the effects of the errors and reckon the original dynamic strain. The analysis results provided some useful advices for the dynamic strain measurement on the actual large scale structures by the approach of two points displacement measurements.

Non-Destructive Strain Determination Based on Phase Measurement and Radial Basis Function

Method to Analyze and Evaluate the Depth Profile of the Three Dimensional Residual Stresses State with X-ray

The geometric phase analysis method based on the local high resolution discrete Fourier transform for deformation measurement

A strain-based ultrasound elastography using phase shift with prior estimates and meshfree shape function.

A Post-Processing Method Based on Radial Basis Functions for the Fast Retrieval of the Strain Field in Digital Image Correlation Methods

High Accuracy Distributed Static Strain Sensing Based on Relative Phase Method with Cyclic Shift and Wavelet Denoising in OFDR

Novel Measurement Method for Full-field Bridge Strain and Displacement with Limited Long-gauge Strain Sensors

Residual strain measurement based on longitudinal to shear wave velocity ratio with a dual-mode EMAT

A Unified Full-Field Deformation Measurement Method for Beam-Like Structure

Geometric Phase Analysis Method Using a Subpixel Displacement Match Algorithm

Full-field Static and dynamic strain measurement by an inverse conjugate beam method with two-type sensor placement

Dynamic strain measurement of large scale structures

The Principle of Strain Reconstruction Tomography: Determination of Quench Strain Distribution from Diffraction Measurements

Deformation measurement based on high resolution distributed optical fiber sensing and conjugated beam method

An in-situ self-calibration method for non-contact full-field strain measurement

Phase-shifting Moiré Interferometry for Residual Strain Measurement

Measurement of Non-Uniform Residual Stresses by Combined Moiré Interferometry and Hole-Drilling Method: Theory, Experimental Method and Applications

Phase-Shifting Technique of Coherent Gradient Sensing Method for Residual Deformation Analysis of Repaired Components

Dynamic deformation measurement with 2-frame phase-shifting speckle interferometry based on speckle statistics and wavefront multiplexing

Energy Resolved Neutron Imaging for Strain Reconstruction using the Finite Element Method

Direct strain measurement method based on the correlation of defocused laser speckle pattern