Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The present-day structural application requires advanced materials at extreme conditions, and the development of it is not economically feasible. As a result, existing material in the composite form has more visibility to suit the purpose. The material's strengths and qualities must be examined before it can be recommended for use in harsh conditions. In the present study, Al2O3 (3, 6, 9, 12, and 15 wt.%) and ZrO2 particles (2 wt.%) are reinforced with Al-Mg-Si alloy (Al 6061), which possess good isotropic behaviour and better interface bonding. The double stir casting process was adopted for the hybrid composite development, and the samples were cold rolled to reduce grain size and pores in the composites. The developed composites were subjected to mechanical characterisation tests such as hardness, tensile, compression, impact and flexural tests. An increase in reinforcement percentage enhances the mechanical properties. The improvement was attributed to the high thermal mismatch and reduction in the inter-particle distance by cold rolling and the reinforcements. Scanning electron microscope microstructural examination was conducted, and even dispersion of 3 to 15 wt.% Al2O3 reinforcements was observed. Tensile elongation decreases with an increase in reinforcement percentage. High elastic modulus and temperature mismatch between matrix and reinforcements increase the strength of the composites. The fracture behaviour of the composites generally showed dimples which are characteristics of ductile fracture, except at 15 wt.% Al2O3 / 2 wt.% ZrO2 showed a large portion of cleavage planes and grain cracking. The Al-Mg-Si alloy is reinforced with 9 wt%. Al2O3 / 2 wt.% ZrO2 had the best properties suitable for its use in different structural applications.

Design of Alumina-Zirconia Composites with Spatially Tailored Strength and Toughness

In situ (Al3Zrp+Al2O3np)/2024Al metal matrix composite with controlled reinforcement architecture fabricated by reaction hot pressing

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Reinforcement mechanisms and optimum design of laminated ceramic composites

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Enhanced Mechanical Properties in Ceramic Multilayer Composites Through Integrating Crystallographic Texture and Second-Phase Toughening

A numerical study of the mechanical and fracture properties of ZTA(Zirconia toughened alumina)p/40Cr steel spatial spherical dot matrix composite

Towards high strengthening efficiency of equiaxed and platelet-shaped alumina reinforced zirconia ceramics with textured microstructure using DLP-based stereolithography

Design and manufacture of near-net-shape metal-ceramic composites with gradient-layered structure and optimized damage tolerance

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Finite Element Analysis on Flexural Strength of Al2O3-ZrO2 Composite Ceramics with Different Proportions

Experimental investigation on the mechanical performance of the Al2O3 and ZrO2 added Al-Mg-Si alloy for structural applications

A novel method for fabricating brick-mortar structured alumina-zirconia ceramics with high toughness

Flexural Stress Homogenization Effects of Interfacial Transition Layers in Modified ZrB2-Al2O3/Epoxy Composites

Design and Experimental Investigation of Laminated Ceramic Composites with High Strength

Preparation of Alumina-Toughened Zirconia Via 3D Printing and Liquid Precursor Infiltration: Manipulation of the Microstructure, the Mechanical Properties and the Low Temperature Aging Behavior

3D printing of architectured epoxy-based composite lattices with exceptional strength and toughness

A damage-tolerant hybrid aluminum composite reinforced with carbon nanotube and zirconia: study of strengthening mechanisms by combined experiments and molecular dynamics simulations

Enhanced strength-ductility synergy of Al/Zn/Al laminated composite with unique interface and multi-modal heterogeneous microstructure

In Situ Preparation and Mechanical Properties of (ZrB2+ZrC)/Zr3[Al(Si)]4C6 Composites