Abstract:We report a type of multimode fiber interferometers (MMI) formed in photonic crystal fiber (PCF). To excite the cladding modes from the fundamental core mode of a PCF, a coupling point is formed. To form the coupling point, we used the method that is blowing compressed gas into the air-holes and discharging at one point, and the air-holes in this point will expand due to gas expansion in the discharge process. By placing two coupling points in series, a very simple all-fiber MMI can be implemented. The detailed fabrication process is that the one end of the PCF is tightly sealed by a short section of single mode fiber (SMF) spliced to the PCF. The other end of the PCF is sealed into a gas chamber and the opened air holes are pressurized. The PCF is then heated locally by the fusion splicer and the holes with higher gas pressure will expand locally where two bubbles formed. We tested the RI responses of fabricated sensors at room temperature by immersing the sensor into solutions with different NaCl concentration. Experimental results show that as refractive-index (RI) increases, the resonance wavelength of the MMI moves toward longer wavelengths. The sensitivity coefficients are estimated by the linear fitting line, which is 46nm/RIU, 154mn/RIU with the interferometer lengths (IL) of 3mm and 6mm. The interferometer with larger IL has higher RI sensitivity. The temperature cross-sensitivity of the sensor is also tested. The temperature sensitivity can be as low as -16.0pm/degrees C.

TCF-MMF-TCF fiber structure based interferometer for refractive index sensing

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Folded-tapered multimode-no-core fiber sensor for simultaneous measurement of refractive index and temperature

[Synthesis of poly U by RNA polymerase with octoadenylic acid (hepta adenylyl-(3',5')-adenosine) as a template].

Tapered Fiber-Optic Mach-Zehnder Interferometer for Ultra-High Sensitivity Measurement of Refractive Index

Refractometer Based on Fiber Mach-Zehnder Interferometer Composed of Two Micro Bending Cores

Refractive Index Sensor Using Microfiber-Based Mach-Zehnder Interferometer

Refractive index sensors based on the fused tapered special multi-mode fiber

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Photonic crystal fiber refractive-index sensor based on multimode interferometry

Microcavity Mach–Zehnder Interferometer Sensors for Refractive Index Sensing

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Temperature compensated highly sensitive refractive index sensor based on Mach-Zehnder interferometer and FBG

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Detection of Refractive Index With a Temperature-Compensated MZI-Based Optical Sensor Using Few-Mode Fiber

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

Miniature Single-Mode Fiber Refractive Index Interferometer Sensor Based on High Order Cladding Mode and Core-Offset