Abstract:Flow injection (FI) techniques were used to develop an efficient on-line sorbent extraction pre-concentration system for graphite furnace atomic absorption spectrometry with lead as a model trace element. Bonded silica with octadecyl functional groups (C18) was used as sorbent in a 15-µl conically shaped micro-column. The lead diethyldithiocarbamate chelate was formed on-line, loaded on to the column for 60 s, washed with de-ionised water and eluted with ethanol into a collector with a volume of 75 µl, made from 0.35 mm i.d. polytetrafluoroethylene tubing. The collected eluate was introduced into the graphite tube by an air flow on initiation of the FI system for pre-concentration of the next sample. The reproducibility of FI peak gradients was exploited through precise timing of the collection of the eluate fraction so that end sections of the eluate bolus containing lower analyte concentrations were discarded. A 26-fold enhancement in peak area compared with 50 µl direct introduction was obtained with 60-s pre-concentration while achieving a precision of 1.9% relative standard deviation for 0.1 µg l–1 of Pb (n= 11), and a detection limit of 0.003 µg l–1(3σ). The complete cycle of operation was 150 s which conveniently fitted into the time interval between successive graphite furnace firings. Determination of Pb in sea water samples showed that the interfering matrix had been almost completely removed during the pre-concentration, and determinations were made without using chemical modifiers. Results obtained for National Research Council of Canada Standard Reference Materials CASS 1, CASS 2 [Seawater (Coastal)] and NASS 1 [Seawater (Open Ocean)] using matrix-matched standards and for the SLRS 1 Riverine Water using simple aqueous standards agreed well with certified values.

Graphite furnace atomic absorption spectrometric determination of some noble metals using flow injection on-line clean-up

Highlights from Recent Literature

Use of a furnace with a graphite filter for electrothermal atomic absorption spectrometry

THE DETERMINATION OF TRACE AMOUNTS OF HEAVY-METALS IN WATERS BY A FLOW-INJECTION SYSTEM INCLUDING ION-EXCHANGE PRECONCENTRATION AND FLAME ATOMIC-ABSORPTION SPECTROMETRIC DETECTION

Flow-Injection Online Sorbent Extraction Preconcentration for Graphite-Furnace Atomic-Absorption Spectrometry

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry

Simultaneous on-line preconcentration and determination of trace metals in environmental samples using a modified nanometer-sized alumina packed micro-column by flow injection combined with ICP-OES

Determination of trace copper and nickel in environmental and biological samples by flow injection on-line microcolumn preconcentration flame AAS using acrylic acid-grafted polytetrafluoroethylene fiber for column packing

Determination Of Gold In Ore By Flame Atomic-Absorption Spectrometry With Flow-Injection Online Sorbent Extraction Preconcentration

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

ONLINE ELECTROLYTIC DISSOLUTION OF SOLID METAL SAMPLES AND DETERMINATION OF COPPER IN ALUMINUM-ALLOYS BY FLAME ATOMIC-ABSORPTION SPECTROMETRY

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

Flame atomic absorption spectrometric determination of silver in geological materials using a flow-injection system with on-line preconcentration by coprecipitation with diethyldithiocarbamate

Online Electrolytic Dissolution of Alloys and Multielement Determination by Inductively Coupled Plasma Atomic Emission-Spectrometry

Determination of Trace and Ultra-Trace Amounts of Germanium in Environmental Samples by Preconcentration in a Graphite Furnace Using a Flow Injection Hydride Generation Technique

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration

High Efficiency Low Sample Consumption On-Line Ion-Exchange Pre-Concentration System for Flow Injection Flame Atomic Absorption Spectrometry

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Metal speciation by coupled in situ graphite furnace electrodeposition and electrothermal atomic absorption spectrometry

Study on determination of gold by solid phase extraction and flame atomic absorption spectrometry with graphitized carbon black loaded 5-(2-hydroxy-5-nitrophenylazo) thiorhodanine as sorbent

Determination of Nickel after Online Sorbent Preconcentration by FI-FAAS Using Dimethylglyoxime as a Complexing Agent