Abstract:Ultrasound-assisted extraction is compared with slurry sampling and microwave-assisted acid digestion for the determination of cadmium, lead and copper in biological samples and cadmium in sediment samples by electrothermal atomic absorption spectrometry (ETAAS). The main advantage of using an ultrasound-assisted extraction in comparison to slurry sampling is a doubling of the tube lifetime for all the chosen analytes, most likely because the sample matrix was not introduced into the atomiser, avoiding the build up of carbonaceous residues or silicates on the graphite platform. Consequently the analytical variable costs were remarkably diminished. In comparison to microwave-assisted digestion, ultrasound-assisted extraction resulted typically in a two-fold better precision and better detection limits. For the extraction, slurries in nitric acid were sonicated for 2–5 min using a titanium probe. Subsequently, the solid phase was separated by centrifugation, and 20 µl of the liquid phase was introduced into a graphite tube previously treated with a W–Rh permanent modifier. For slurry sampling, the slurries were sonicated for 20 s before being delivered to the W–Rh treated platform. Nitric acid concentration, sonication time, sonication power, sample mass and particle size were optimised for each analyte to obtain quantitative recoveries. For cadmium the optimum conditions (sediments and biological materials) were, 0.2–3.0% m/v slurry, 0.5% HNO3, 2 min sonication at 15 W. For copper and lead (biological materials only) the optimum conditions were 0.2–2.0% m/v slurry, 5.0% HNO3, 5 min 35 W. The particle size chosen for all analytes was <30 µm. For biological materials, the extraction recoveries were: Cd, 95–105%; Cu, 90–101%; and Pb, 88–98%. However, only cadmium was quantitatively extracted (based on the certified values of the reference materials) from sediment samples (recoveries 92–95%). For Pb and Cu the maximum recoveries attained were 54% and 60% respectively. Detection limits, based on integrated absorbance for the extracts of a 2.5% m/v biological material were: Cd, 3.0 ng g−1; Cu, 88 ng g−1; and Pb, 55 ng g−1. For 0.5% m/v sediment the cadmium detection limit was 15 ng g−1.

Metal speciation by coupled in situ graphite furnace electrodeposition and electrothermal atomic absorption spectrometry

In-situ Determination of Metallic Variation and Multi-Association in Single Particles by Combining Synchrotron Microprobe, Sequential Chemical Extraction and Multivariate Statistical Analysis.

Electrochemical Quartz Crystal Microgravimetry Study of Metal Deposition from EDTA Complexes

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Simultaneous Multi-Elemental Speciation of As, Hg and Pb by Inductively Coupled Plasma Mass Spectrometry Interfaced with High-Performance Liquid Chromatography

Coupling Electrophoretic Separation With Inductively Coupled Plasma Spectroscopic Detection: Interfaces And Applications From Elemental Speciation, Metal-Ligand Interaction To Indirect Determination

Elemental Speciation Analysis in Capillary Electrophoresis

Sequential Speciation Analysis of Heavy Metals in Drinking Water Pipe Scales by Mass Spectrometry

Highly Selective in Situ Metal Ion Determination by Hybrid Electrochemical “adsorption–desorption” and Colorimetric Methods

Electrothermal Atomic Absorption Spectrometry to Determine As, Cd, Cr, Cu, Hg, and Pb in Soils and Sediments: A Review and Perspectives

Preconcentration and Determination of Trace Elements with 2-Aminoacetylthiophenol Functionalized Amberlite XAD-2 by Inductively Coupled Plasma–atomic Emission Spectrometry

Solid Phase Extraction and Preconcentration of Trace Heavy Metal Ions in Natural Water with 2,2′‐Dithiobisaniline Modified Amberlite XAD‐2

Graphite furnace atomic absorption spectrometric determination of some noble metals using flow injection on-line clean-up

Simultaneous determination of lead, nickel, tin and copper in aluminium-base alloys using slurry sampling by electrical discharge and multielement ETAAS

Speciation Analysis of Aluminium(Iii) in Natural Waters and Biological Fluids by Complexing with Various Catechols Followed by Differential Pulse Voltammetry Detection

Co-Deposition of Bimetallic Au-Pt with L-Cysteine on Electrodes and Removal of Copper by Iron Powder for Trace Aqueous Arsenic Detection

A Screen-Printed Carbon Electrode Modified with a Bismuth Film and Gold Nanoparticles for Simultaneous Stripping Voltammetric Determination of Zn(II), Pb(II) and Cu(II)

Electrochemical Redox of Arsenic (III) and Cu (II) Mixtures with Ultraflat Au(111) Thin Films in Water

A Pre-Enrichment Procedure Using Diethyldithiocarbamate-Modified TiO2nanoparticles for the Analysis of Biological and Natural Water Samples by ICP-AES

Simultaneous determination of trace Pb(II), Cd(II), and Zn(II) using an integrated three-electrode modified with bismuth film

Comparison of ultrasound-assisted extraction, slurry sampling and microwave-assisted digestion for cadmium, copper and lead determination in biological and sediment samples by electrothermal atomic absorption spectrometry