Abstract:High strength micro-alloyed steel has been widely used in automobile and machines because of the remarkable high strength and forming property which are attributed to nano-precipitates and refinement of the organization. Since the nano-precipitates are mostly nucleated between austenite/ferrite transition and ferrite can significantly advance strength, it is important to investigate precipitate behavior in coiling process. Nanoindentation technology provides a chance to study the special influence of nano-precipitates on the micro-properties of ferrite. The effect of cooling rate during continuous cooling process and coiling process on microstructural evolution and micro-hardness of Nb-Ti micro-alloyed steel were studied by using the thermal mechanical simulator, micro-hardness instrument, TEM and nanoindentation instrument. The precipitate behaviors of (Nb,Ti)C in coiling process and its effect on nano-hardnesss of ferrite were discussed. Experiments results indicated that the increase of cooling rate in continuous cooling process and coiling process could promote the microstructure transition from ferrite and pearlite to bainite. The micro-hardness of the tested steel increased with the increase of cooling rate in continuous cooling process, and decreased with the cooling rate in coiling process because of the large number of the dispersive nano-precipitate in ferrite which could improve the strength of matrix. The smaller cooling rate could promote volume fraction of (Nb, Ti)C particles in ferrite because there was enough time for the nucleation and growth of (Nb, Ti)C precipitates. When the cooling rate in coiling process was 0.1 degrees C/s, precipitates were dispersive in ferrite matrix with a diameter of less than 10 nm. The nanohardness and Young's modulus of ferrite were 4.13 and 249.3 GPa for Nb-Ti micro-alloyed steel, 2.64 and 237.4 GPa for C-Si-Mn steel. The contribution of nano-precipitates to nanohardness of ferrite reached 1.49 GPa.

Effect of Mo on Nano‐Precipitation Behavior and Microscopic Mechanical Characteristics of Ferrite

Effect of Mo content on the thermal stability of Ti-Mo-bearing ferritic steel

Precipitation Behavior Of (Nb, Ti)C In Coiling Process And Its Effect On Micro-Mechanical Characteristics Of Ferrite

The Effect of Nb/Mo on the Microstructures and Mechanical Properties of Fe-Mn-Al-Ni-C Austenitic Steels

Study of Transformation Characteristics and Nano-Scale Precipitation in Nb Microalloyed Steel

Influence of Molybdenum Contents on the Microstructure, Mechanical Properties and Oxidation Behavior of Multi-Elemental Nb–Si Based Ultrahigh Temperature Alloys

Precipitation of MC Phase and Precipitation Strengthening in Hot Rolled Nb–Mo and Nb–Ti Steels

Influence of cooling rate on phase transformation and precipitation behavior of Ti-bearing steel in continuous cooling process

Effect of Mo on Microstructure and Mechanical Properties of Nb–Ti–C–B Multiphase Alloy

Precipitation of Microalloyed Carbonitride and Its Strengthening Mechanism in Low Carbon Steels Containing Nb and Mo

Contribution of Interphase Precipitation on Yield Strength in Thermomechanically Simulated Ti–Nb and Ti–Nb–Mo Microalloyed Steels

Unexpected strengthening of the Mo-containing low-density steel achieved through a novel nano-ordered phase

Effect of Molybdenum Addition on the Precipitation of Carbides in the Austenite Matrix of Titanium Micro-Alloyed Steels

The effect of Ti–Mo–Nb on the microstructures and tensile properties of a Fe–Mn–Al–C austenitic steel

Influence of Mo on Tempering Precipitation in Nb-Mo-V Microalloyed Steels

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Influence of Γ′ Precipitate on Impact Toughness and Tensile Properties of a New Fe–Ni-based Superalloy

Effect of molybdenum on microstructure and properties of Ti microalloyed steel under different cooling conditions

Revealing the influence of Mo addition on interphase precipitation in Ti-bearing low carbon steels

Effect of Mo-Related Precipitation Behavior on the Strengthening and Thermal Stability of 4cr5mo2v Die Steel

Effect of Mo Addition on Microstructures and Mechanical Properties of Ti2AlNb Alloy