Abstract:TiCrAlN hard films based on TiN or CrN show superior properties in terms of hardness, wear resistance, and thermal stability due to the addition of alloying elements. AlCrTiN films based on AlN may have higher thermal shock properties, but the knowledge of AlCrTiN films with high Al content has been insufficient until now. In this study, two sets of AlCrTiN hard films with different Al contents of 48 at.% and 58 at.% among metal components were prepared via multi-arc ion plating so as to investigate the effect of Al content on the phase composition, hardness, and thermal shock resistance of the films. The same microstructures, morphologies, and thicknesses of the fabricated film samples were achieved by changing the combination of cathode alloy targets and adjusting the arc source current during deposition. The surface chemical composition, cross-sectional elemental distribution, microstructure, morphology, phase composition, surface hardness, film/substrate adhesion strength, and thermal shock performance of the AlCrTiN films were examined. The obtained results reveal that the two sets of AlTiCrN hard films are face-centered cubic solid solutions with a columnar fine grain structure and a preferred growth orientation of (200) crystal plane. The hardness of the AlCrTiN films can be improved up to HV2850 by properly reducing the Al content from 58 at.% to 48 at.%. Meanwhile, the film/substrate adhesion performance is strong enough in terms of critical loads greater than 200 N. Furthermore, the AlCrTiN films maintain high thermal shock resistance at 600 °C when the Al content decreases from 58 at.% to 48 at.%. The optimal composition of the AlCrTiN hard films is 25:13:15:47 (at.%), based on the consideration of hardness, adhesion, and thermal shock cycling resistance. This optimal AlCrTiN hard film can be suggested as an option for protective coatings of hot process die tools.

Influence of Al/Ti Atomic Ratio on Hard Al–TiCN Films

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Tribological Properties and Preparation of (Ti,Al)N Coatings on High Speed Steel Substrate

Tribological Performances of TiAlN Film on TC4 Alloy Surface Prepared by Two Kinds of Arc Target

Influence of titanium concentration on mechanical properties and wear resistance to Ti6Al4V of Ti-C:H on cemented carbide

Wear Behavior of TiN/TiAlSiN Nanocomposite Multilayer Coatings from Ambient Temperature to Medium Temperature

Tribological properties of self-healing NiCrAlY/Cr3C2-Ti3AlC2 coating at high temperatures

Effects of Al Incorporation on the Mechanical and Tribological Properties of Ti-doped A-C:H Films Deposited by Magnetron Sputtering

Structure and Tribological Properties of CrTiAlCN Coatings with Various Carbon Contents

Effects of temperature on tribological properties of nanostructured and conventional Al2O3–3 wt.% TiO2 coatings

Effects of Al substitution with Si and Sn on tribological performance of Ti3AlC2

Phase Composition, Hardness, and Thermal Shock Properties of AlCrTiN Hard Films with High Aluminum Content

Effect of the Degree of Aluminum Doping on the Mechanical and Tribological Characteristics of Titanium–Aluminum Nitride Films

Microstructure and Tribological Behavior of TiAlSiN Coatings Deposited by Deep Oscillation Magnetron Sputtering

Wear Resistance of Arc Ion Plating Deposited TiN/AlN-TiAlN Film

Properties of TiAlCrN coatings prepared by vacuum cathodic arc ion plating

Influence of annealing temperature on microstructure evolution of TiAlSiN coating and its tribological behavior against Ti6Al4V alloys

Research on high temperature wear resistance mechanism of CrN/CrAlN multilayer coatings

Controllable high adhesion and low friction coefficient in TiAlCN coatings by tuning the C/N ratio

Wear Resistance of Thermal Spraying Nickel-Coated Graphite Layer on Titanium Alloy

Improved Wear Resistance and Mechanical Properties of Al Matrix with TiAl-based Coatings