Abstract:<p>This paper proposes a novel tool-based hybrid laser-ECM process which exploits synergy of laser and electrochemical process energies along the same machining axis, thereby enhancing the potential of both processes while compensating and minimizing their limitations. This process combines features from jet-ECM and water jet guided laser processes into a new micromachining process. In this study, details of this tool-based hybrid laser-electrochemical micromachining process are presented and an experimental study on process-material interaction is performed using Inconel IN718 as workpiece material. According to the experimental results, material removal rates of the order of 0.6 mm<sup>3</sup>/min are obtained. It has been observed that while the process response is material-dependent as well as ECM parameter dependent, the effective laser pulse energy reaching the workpiece surface is the main factor influencing the surface characteristics. Additionally, the electrolyte flow rate affects material removal and also influences laser coupling into the tool-electrode. It has been observed that within a specific process window i.e. pulse-energy 30–45 μJ, flow rate 32–48 ml/min, IEG 20–30 μm, voltage 20–25 V; high quality surfaces are observed with less defects. At pulse energies higher than 60 μJ, the process speed becomes higher but the surface becomes rough due to combined material removal mechanisms taking place. Furthermore, metallographic investigations on the machined surface reveal presence of multiple removal mechanisms such as laser removal, laser assisted electrochemical removal and electrochemical removal depending on the applied laser pulse energy. Overall, this study has shown that hybrid laser-electrochemical micromachining has a high potential to machine advanced metallic alloys with conductivity variations even for high aspect ratio features and needs further research developments.</p>

High Throughput Microfabrication Using Laser Induced Plasma in Saline Aqueous Medium

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Laser-induced microjet-assisted ablation for high-quality microfabrication

Investigation on Laser Etch-Machining Underwater Based on Thermal-Mechanical Effect

Laser Machining at High ∼PW/cm2 Intensity and High Throughput

Surface microfabrication using coaxial waterjet assisted laser-induced plasma micromachining

A new laser-induced plasma electrolyte jet machining method: Efficient material removal mechanism and synergistic effects

Influence of Laser Induced Plasma on Material Removal in Micro-Drilling Underwater

Liquid-Assisted Femtosecond Laser Precision-Machining of Silica.

Experimental Investigation and Optimization of Laser Induced Plasma Micromachining Using Flowing Water

Laser-Induced-Plasma-Assisted Ablation for Glass Microfabrication

Unidirectional Magnetic Field Assisted Laser Induced Plasma Micro-Machining

Medium Pressure Plasma Processing of Fused Silica: A Comparative Study for Material Removal Rate

Infrared Pulsed Picosecond Laser-Induced Plasma-Assisted Ablation of Micro-textures on Quartz Surface

Fabrication of Micro-Texture Channel on Glass by Laser-Induced Plasma-Assisted Ablation and Chemical Corrosion for Microfluidic Devices

Laser-induced plasma micromachining on surfaces parallel to the incident laser in different solutions

Deep Channel Fabrication on Copper by Multi-Scan Underwater Laser Machining

Laser-Induced Bubble Dynamics Optimization for High-Aspect-Ratio 3D Micro-Fluidic Channels Fabrication

Femtosecond laser shockwave peening ablation in liquids for hierarchical micro/nanostructuring of brittle silicon and its biological application

Water-assisted femtosecond laser ablation for fabricating three-dimensional microfluidic chips

A tool-based hybrid laser-electrochemical micromachining process: Experimental investigations and synergistic effects