Abstract:Multipass welding of high strength steels used for fabrication and joining of transmission pipelines presents a number of metallurgical challenges. A key concern is both the strength and toughness of the heat affected zone (HAZ) adjacent to both seam and girth welds. In this work, a systematic study has been conducted on regions of the heat affected zone in the base metal where the first welding pass produces a thermal excursion which results in a coarse-grained heat affected zone (CGHAZ). The subsequent weld pass involves intercritical annealing of this region, i.e. a microstructure associated with intercritically reheated coarse grain heat affected zone (ICCGHAZ). The small ICCGHAZ region is often identified as being particularly susceptible to crack initiation. This work was undertaken to understand microstructure development in this zone and how the ICCGHAZ may affect the overall performance of the HAZ. Gleeble thermomechanical simulations have been conducted to produce bulk samples representative of different welding scenarios. Charpy impact tests and tensile tests have been performed over a range of temperatures. It was found that when a continuous necklace of martensite-austenite islands form on the prior austenite grain boundaries (i.e. for a M/A fraction of ≈10%), the Charpy impact toughness energy is dramatically decreased and the ductile brittle transition temperature is significantly raised. Detailed studies on the secondary cracks have been conducted to examine the fracture mechanisms in the different microstructures. The results show that the lower bainite microstructures obtained after the 1st thermal treatment, representative of CGHAZ have excellent impact properties. The impact toughness of the microstructures typical of ICCGHAZ is strongly dependent on the composition as well as morphology and spatial distribution of the resulting martensite-austenite (M/A) islands transformed from inter-critically formed austenite. This zone can play a significant role in fracture initiation and thus needs to be considered in alloy and welding process designs.

Microstructure and Toughness of the CGHAZ of an Offshore Platform Steel

Toughness of Heat-Affected Zone of 800 Mpa Grade Low Alloy Steel

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Significant influence of heat input on microstructure evolution and mechanical properties of the simulated CGHAZ in a 1000 MPa grade ultra-high strength steel

Revealing the mechanism of crack initiation and propagation in CGHAZ of S690QL welded joints through low-temperature impact tests with gradient setting of pendulum angle

Crystallographic Study of Transformation Products of Heat-Affected Zone and Correlation with Properties of FH690 Heavy-Gauge Marine Steel by Multi-pass Submerged Arc Welding

Microstructure and Properties of Coarse Grain Zone in Single-Pass Welding of V-N Microalloyed Steel

Microstructure and mechanical properties of thermal simulation CGHAZ of DP780 high strength steel

Mechanical Behaviour of Intercritically Reheated Coarse-Grained Heat Affected Zone in High Strength Line Pipe Steels

Study on Microstructure and Low‐Temperature Impact Toughness in Coarse Grain Heat‐Affected Zone of EH460 Steel

Mechanism of Interfacial Microstructure Evolution of G115 Steel in Simulated Heat Affected Zone

Effect of undercooled austenite ausforming on the role of the M–A constituents in the CGHAZ toughness of the HSLA steels with bainite structure

Favorable Impact Toughness of High Heat Input Coarse-Grained HAZ in an Ultra-Low Carbon High-Strength Microalloyed Steel

Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates

Elucidating the heat input on CGHAZ microstructure and its irregular effect on impact toughness for a novel V-N microalloying weathering steel

On the role of Cu addition in toughness improvement of coarse grained heat affected zone in a low carbon high strength steel

Mechanism of BN-Promoting Acicular Ferrite Nucleation to Improve Heat-Affected Zone Toughness of V-N-Ti Microalloyed Offshore Steel

Research on the mechanism of Cu addition on the grain boundary characteristics and toughness in CGHAZ of low carbon low alloy steel

Microstructure and Mechanical Properties of Heat Affected Zone in Multi-Pass GMA Welded Al–Zn–Mg–Cu Alloy

Changes in microstructure and properties of weld heat-affected zone of high-strength low-alloy steel

Study on Local Brittle Zone Phenomena of Intercritically Reheated Coarse-Grained Heat-Affected Zone in Pipeline Steels