Abstract:The influence of welding heat input on the tensile properties and low-temperature impact toughness of Q960E weld metals (WMs) and butt welded joints (BWJs) was investigated. Prediction models were established to correlate the heat input range (4–17.5 kJ/cm) with the yield strength, tensile strength , and elongation of both WMs and BWJs. Impact toughness was examined at different temperatures for the WMs, heat-affected zones (HAZs), and BM. Microstructure transformations were revealed in different regions of the BWJs, and their impact on the tensile properties and toughness. The results demonstrated that the yield strength, tensile strength, and elongation of the BWJs were 0.80–0.99, 0.9–1.0, and 0.44–0.82 of the BM, respectively; this was attributed to variations in the average effective grain size and Taylor factor in different regions of the BWJs, which led to distinct strength and plastic deformation capacities. The impact toughness of both the WMs and HAZs was notably diminished when compared to the BM. For the WMs, the Charpy impact absorption energy values were only 0.24–0.34, 0.50–0.59, and 0.40–0.50 of that of the BM for heat inputs of 4, 7.4, and 11.2 kJ/cm, respectively. For the same heat inputs, in the case of the HAZs, the Charpy impact absorption energy values were only 0.71–0.90, 0.63–0.70, and 0.63–0.80 of that of the BM, respectively. The presence of martensite–austenite (M–A) islands in the HAZ contributed to the decrease in the impact toughness. Increasing the heat input resulted in larger M–A components, thus further reducing the impact toughness of the HAZ. Conversely, a higher heat input for the WMs promoted the formation of acicular ferrite, thereby enhancing its impact toughness. However, owing to the abundant lath martensite present in the WM, its impact toughness was significantly inferior to that of the BM.

Significant influence of heat input on microstructure evolution and mechanical properties of the simulated CGHAZ in a 1000 MPa grade ultra-high strength steel

Favorable Impact Toughness of High Heat Input Coarse-Grained HAZ in an Ultra-Low Carbon High-Strength Microalloyed Steel

Elucidating the heat input on CGHAZ microstructure and its irregular effect on impact toughness for a novel V-N microalloying weathering steel

Effect of heat input on the microstructure and mechanical properties of the simulated coarse-grained heat-affected zone (CGHAZ) of novel twining-induced plasticity(TWIP) steel

Effect of Heat Input on Microstructure and Properties in Heat Affected Zone of Astm A572 Gr.65 Steel

Effect of Heat Input on Austenite Reversion, Recrystallization, and Ensuing Impact Toughness in Simulated Intercritical Coarse‐Grained Heat Affected Zone of Medium Mn Steel

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Effect of heat input on the mechanical properties of welded Q960E ultra-high strength steel butt joints

Study on Microstructure and Low‐Temperature Impact Toughness in Coarse Grain Heat‐Affected Zone of EH460 Steel

Effect of Niobium Content on the Microstructure and Mechanical Properties of Simulated Coarse-Grained Heat-Affected Zone (CGHAZ) of High-Strength Low-Alloy (HSLA) Steels

Microstructure and mechanical properties of thermal simulation CGHAZ of DP780 high strength steel

Effect of Heat Input on Microstructure and Performance of Welded Joint in 1 000 MPa Grade Steel for Construction Machinery

On the role of Cu addition in toughness improvement of coarse grained heat affected zone in a low carbon high strength steel

Effect of step cooling process on microstructures and mechanical properties in thermal simulated CGHAZ of an ultra-high strength steel

Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates

Revealing the mechanism of crack initiation and propagation in CGHAZ of S690QL welded joints through low-temperature impact tests with gradient setting of pendulum angle

Mechanism of Interfacial Microstructure Evolution of G115 Steel in Simulated Heat Affected Zone

Effect of Heat Input on the Metal Microstructure and Mechanical Properties of Q960 High‐Strength Steel Solid Core Welding Wire

Effect of Pre-Weld Heat Treatment on the Microstructure and Properties of Coarse-Grained Heat-Affected Zone of a Wind Power Steel after Simulated Welding

Effect of Welding Heat Input on Simulated HAZ Areas in S960QL High Strength Steel

Crystallographic Study of Transformation Products of Heat-Affected Zone and Correlation with Properties of FH690 Heavy-Gauge Marine Steel by Multi-pass Submerged Arc Welding