Abstract:This study investigated the effect of heat inputs on coarse-grained heat affected zone (CGHAZ) microstructure and impact properties of a novel vanadium (V) and nitrogen (N) microalloyed weathering steel via a Gleeble TM system, revealing the metallurgical essence of the steel suitable for large heat input ( E j ) welding. The results indicate that in CGHAZ, the dominant microstructure was composed of lath bainitic ferrite (LBF) at E j =15 kJ/cm, granular bainitic ferrite (GBF) at E j =35 kJ/cm, and a mixture of intragranular acicular ferrite (IGAF), intragranular polygon ferrite(IGPF) and grain boundary polygonal ferrite (GBPF) at E j =55 and 75 kJ/cm, respectively, apart from martensite/austenite (M/A) constituents in each one. The area fraction, f M/A , and mean size, d M/A , of M/A constituents increased monotonously with the E j . In addition, with increasing E j from 15 to 35 kJ/cm, the fraction, f MTAs>15° , of high-angle grain boundaries (HAGBs) with misorientation tolerance angles (MTAs) greater than 15° reduced, while the mean equivalent diameter, MED MTA≥15° , of grains with HAGBs increased. However, as E j further increased to 55 and 75 kJ/cm as the two large heat inputs, the precipitation of (Ti, V) (C, N) and thereby the heterogeneous nucleation of polygonal and acicular ferrite were promoted by a lowered degree of undercooling, resulting in the decreased MED MTA≥15° and the increased fraction f MTAs>15° . Accordingly, the impact toughness of CGHAZ was degraded with the increase of E j from 15 to 35 kJ/cm, but enhanced with the increase of E j from 35 to 75 kJ/cm.

Favorable Impact Toughness of High Heat Input Coarse-Grained HAZ in an Ultra-Low Carbon High-Strength Microalloyed Steel

Significant influence of heat input on microstructure evolution and mechanical properties of the simulated CGHAZ in a 1000 MPa grade ultra-high strength steel

Effect of Heat-Input on Microstructure and Toughness of CGHAZ in a High-Nb-Content Microalloyed HSLA Steel.

Elucidating the heat input on CGHAZ microstructure and its irregular effect on impact toughness for a novel V-N microalloying weathering steel

On the role of Cu addition in toughness improvement of coarse grained heat affected zone in a low carbon high strength steel

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Improvement of Impact Toughness of Simulated Heat Affected Zone by Addition of Aluminium

Study on Microstructure and Low‐Temperature Impact Toughness in Coarse Grain Heat‐Affected Zone of EH460 Steel

Effect of heat input on toughness of coarse-grained heat-affected zone of an ultra low carbon acicular ferrite steel

Improvement of impact toughness by microstructure refinement of simulated CGHAZ through enhancing welding heat input of low carbon Mo-V-Ti-N-B steel

Effect of welding heat input on microstructure and impact toughness in CGHAZ of X100Q steel

Effect of Ferritic Morphology on Yield Strength of CGHAZ in a Low Carbon Mo-V-N-Ti-B Steel

Effect of Niobium Content on the Microstructure and Mechanical Properties of Simulated Coarse-Grained Heat-Affected Zone (CGHAZ) of High-Strength Low-Alloy (HSLA) Steels

Microstructure and Fracture Characteristics of HAZs of Ca- deoxidized Steel Plates with Different Ti/N Ratios After HHIW

Effect of Heat Input on Microstructure and Properties in Heat Affected Zone of Astm A572 Gr.65 Steel

Grain Refinement Mechanism in the CGHAZ of Ultra-High-Strength Structural Steel: A Critical Analysis of the Impacts of Prior Austenite Grain and Cooling Rates

Effect of Welding Processes with High Heat Input on the Microstructure and Toughness of Coarse-Grained Heat-Affected Zone of a High-Strength High-Toughness Steel

Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates

Effect of Heat Input on Austenite Reversion, Recrystallization, and Ensuing Impact Toughness in Simulated Intercritical Coarse‐Grained Heat Affected Zone of Medium Mn Steel

Effect of heat input on the microstructure and mechanical properties of the simulated coarse-grained heat-affected zone (CGHAZ) of novel twining-induced plasticity(TWIP) steel

Mechanism of Interfacial Microstructure Evolution of G115 Steel in Simulated Heat Affected Zone