Abstract:This paper elucidates the softening kinetics during isothermal annealing of an AlSi11 alloy manufactured by laser powder bed fusion (L-PBF) by using in situ high-energy synchrotron X-ray diffraction complemented by microstructure microscopy analysis. Annealing in the temperature range of 20 °C to 500 °C for one hour led to evolutions in the as-built L-PBF cellular structure, including partial fragmentation of the cell boundaries between 20 °C and 300 °C; the breakdown and transformation into ultrafine Si-enriched particles in the range of 300 °C to 400 °C; and subsequently coarsening at temperatures exceeding 400 °C. The evolution of the crystallite size for Si is consistent with the Ostwald ripening equation with an activation energy of 75.8 kJ mol −1 , while the Al peaks registered only marginal variations through all the thermal cycle. The examination of dislocation densities and grain sizes, which varied from 4 × 10 14 m −2 to 1 × 10 14 m −2 and 15 μm to 13 μm respectively, in the temperature range of 20 °C to 500 °C, revealed a practical absence of recovery and recrystallization phenomena in the Al matrix. On the other hand, Si diffusion from the supersaturated Al matrix and the coalescence of particles assisted the cellular structure transformation. Thus, the decrease in yield strength observed in the AlSi11 alloy subjected to annealing treatments is primarily driven by a thermally assisted softening process, which is controlled by the diffusion of Si, rather than the annihilation of dislocations and grain growth in the Al matrix.

Thermal Stability Improvement Induced by Laser Annealing for 50-Å Ni(Pt) Film Silicidation

Ultrathin Ni(Pt)Si Film Formation Induced by Laser Annealing

The Effects of Extended Heat Treatment on Ni Induced Lateral Crystallization of Amorphous Silicon Thin Films

Mechanism about Improvement of NiSi Thermal Stability for Ni/Pt/Si(1 1 1) Bi-Layered System

Enhanced Thermal Stability of NiSi Films on Si(111) Substrates by a Thin Pt Interlayer

Laser Annealing of Amorphous Ni-Ti Shape Memory Alloy Thin Films

Effect of Pt Interlayer on Thermal Stability of NiSi Films

Enhanced Effects of Pt Layer on Thermal Stability of NiSi Thin Film by Solid Phase Reaction of Ni/Si(100) System

Improvement Of The Thermal Stability Of Nisi Films By Using A Thin Pt Interlayer

Improvement of Ni Silicide Thermal Stability by Using Vanadium Elements

Annealing Effects on the Microstructure and Photoluminescence Properties of Ni-Doped Zno Films

Explanation of the Enhancement of NiSi Thermal Stability According to TFD Equations and Miedema's Model

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Influence of Post-Annealing Treatment on the Morphology of Au Films Deposited on Liquid Surfaces

Nickel Induced Phase Separation and Nanocrystal Growth in Si-Rich Silica Films

Softening kinetics and mechanism during the annealing of an Al-Si alloy produced by laser powder bed fusion

A comparative study of C, N and Xe pre-amorphization implantation processes for improving the thermal stability of NiSi films

NiPt silicide agglomeration accompanied by stress relaxation in NiSi(010) ∥ Si(001) grains

Comparison of the Thermal Stabilities of Nisi Films in Ni/Si, Ni/Pd/Si and Ni/Pt/Si Systems

Influence of Ti Interlayer on Untrathin Ni Film Silicidation

Thermal Modeling of Laser-Annealing-Induced Crystallization of Amorphous Niti Thin Films